-
Hi,
I found small tube head amp-15 watts.
Looks very interesting.I've contacted with producer and I think I will order one.
Attachment 6047
-
02-19-2013 02:28 PM
-
who makes the amp?
-
JENSEN głośniki gitarowe, Seria Vintage, Alnico, Ceramic, Mod, Jet.
about 4 kg...that is nice!
Made in Poland
ps.
They also work on new version 30 watts.Last edited by kris; 02-19-2013 at 04:07 PM.
-
The H&K TubeMeister 5 weighs 8 pounds (3.5 kg) and the TubeMeister 18 weighs 11 pounds (5 kg). Don't know how good they are, but they pack quite a feature set into a lightweight package. There is an H&K thread about them somewhere.
-
My polish is very bad, so how much for the head
-
Originally Posted by jazzkatten
There is a link to guitar player who use it long time:
Jensen AlnicoLast edited by kris; 02-20-2013 at 07:12 AM.
-
Originally Posted by HighSpeedSpoon
-
Thanks!
It is a pretty good price for the head. If they ship too Sweden I may buy a head
-
Originally Posted by jazzkatten
I will contact to producent today and give you information about that.
I am also interesting in buy .
I have to test it with different guitars and I woud like to write revue how this "baby" works.
Thanks for interest.
Kris
ps.
I'll preper technical info about this amp today or tomorrow....:-)Last edited by kris; 02-20-2013 at 05:53 AM.
-
Originally Posted by jazzkatten
There is contact to producet:
Jerzy Purtak
PPHU ELMUZ & BEYMA PL
26-200 KOŃSKIE
UL.MŁYŃSKA 11
POLAND
elmuz@pro.onet.pl www.elmuz.com.pl
tel. + 48 41 3750022Last edited by kris; 02-22-2013 at 03:55 AM.
-
would be nice to see what type of tube it uses.
I am guessing it is tube pre and SS poweramp but a pentode in the pre is interesting..
-
Originally Posted by SamBooka
2 x ECC83, 2 x EL84 , 1 x Ef 86.
I will get actual technical info tomorrow.
I 'll get new head and demo cabinet with Jensen Alnico 12" speaker in saturday.
Best
Kris
ps.
It is difficult to distort this head.That is good news-for me.
-
Lokking forward to some sound samples
-
Originally Posted by jazzkatten
This guitar player Marek Kadziela use this head at gigs and in studio.
http://www.jensen.com.pl/aktualnosci...id=1354135636&
Also I'll do some demo recordings in the next week.Last edited by kris; 02-20-2013 at 02:04 PM.
-
MV-3H
Pure Tube Guitar Head 15W/8 ohm
Technical data :
1.two inputs with sensitivity arround:
- 30mV (triode type preamp, channel No.2) ,
- 100mV (pentode type preamp, chammel No.1),
2. equalizer 2-points , min +/- 12dB for 40Hz i 10kHz , in both inputs ,
3.GAIN regulation 0-100% in both channels,
4.speaker output - 8 ohm, for order can be 4 or 16 ohms , or mixed 4 + 8 ohms,
5.LINE OUT balanced 0dB ,
6.automatic electronic circuit for delayed switching of high voltage ,
7.amplifier including 5 pcs of tubes (2x ECC83, EF86, 2xEL84 or equivalents),
8.power supply 230V 50Hz , 70W
9.dimensions 35 x 11,5 x 14 cm,
10.weight 4,60 kg ,
11.production : Made in EU .
-
Are you sure that it is priced at 250 euro? That equates to around $330.
-
Originally Posted by edh
-
I'will test MV-3h head with 3 different cabinets .One with 12" Jensen Alnico speaker, second with 10" Eminence Delta Demon and third with 10" Eminence Beta.
I will do some recordings with Shure mike next week.
I am very interesting how MV-3h works with different speakers.
-
I have listen to the amp, and what I could hear it sounded good
-
There is more info about amp head that I've got from producer today.:
Pure Tube Guitar Head 15W/8 Ohm
MV-3H type
60's cult sound. In amplifier are used JJ-electronic tubes production (d.TESLA), or new tubes Soviet
(CCCP), the so-called NOS (new, old stock), produced for military purposes (high mechanical strength and
long life, better performance than the current production), or to order for other companies producing out of
the tube. We recommend the version with the preamplifier to the Soviet triodes with a warm, soft and full
sound. Two independent inputs of different types of tubes , triode and pentode.
Big capabilities in small device
When we build head MV-3H we use high quality components. Applied transformers have been developed
specifically for this amplifier. MV-3H has two inputs . Each track is a two-point adjustable tone and
strengthen. The amplifier is an external speaker output , balanced output signal LINE 0dB around like a
mixer or another amplifier. Head is equipped with the automatic, delayed switching the anode voltage.
We produce combo with 12” speaker (Jensen) , type MV-3H , also .
Technical data :
1.two inputs with sensitivity arround:
- 30mV (triode type preamp, channel No.2) ,
- 100mV (pentode type preamp, channel No.1),
2. equalizer 2-points , min +/- 12dB for 40Hz i 10kHz , in both inputs ,
3.GAIN regulation 0-100% in both channels,
4.speaker output - 8 ohm, for order can be 4 or 16 ohms load , or mixed
4 + 8 ohms,
5.LINE OUT balanced 0dB ,
6.automatic electronic circuit for delayed switching of high voltage ,
7.amplifier including 5 pcs of tubes (2 x ECC83,1 x EF86, 2 x EL84 or Made in CCCP -NOS types),
8.power supply 230V 50Hz , 70W
9.dimensions 35 x 11,5 x 14 cm,
10.weight 4,60 kg ,
11.production : Made in EU .
http://www.jensen.com.pl/sklep/index...lumny-gitarowe
-
Last edited by kris; 02-21-2013 at 07:26 AM.
-
Originally Posted by jazzkatten
I also like the sound.
I will have it for test in few days...:-)
-
-
Just quickly tested the combo with my JB strat
Sounds either clean or dist rather pleasant
The tone is on the neat and sweet side and seems well balanced
Acoustic band compatible (good sound level reducer)
Many I/O features
Power tube bias self-adjusting
Really compact but not lightweight
-
I talked to jazz guitarist who use MV3 head .
He like very much the clean sound of the amp.
That is good news for me...:-)
I cant find similar product on internet.
Gibson LeGrand Missing Split Diamond Inlay
Today, 11:40 AM in For Sale