Reply to Thread Bookmark Thread
Page 1 of 2 12 LastLast
Posts 1 to 25 of 47
  1. #1

    User Info Menu

    Greetings,
    I am new to the forum. I just purchased a Gibson ES 775. Unfortunately, the previous owner removed the pickguard. Are there any forum members who have one they could make a tracing of so I can have one fabricated?

    I have contacted several custom pickguard makers, and they are able to. Just need a pattern...

    Thanks..
    Be safe and stay well

  2.  

    The Jazz Guitar Chord Dictionary
     
  3. #2

    User Info Menu

    Quote Originally Posted by apell
    Greetings,
    I am new to the forum. I just purchased a Gibson ES 775. Unfortunately, the previous owner removed the pickguard. Are there any forum members who have one they could make a tracing of so I can have one fabricated?

    I have contacted several custom pickguard makers, and they are able to. Just need a pattern...

    Thanks..
    Be safe and stay well
    It's quite easy to make one yourself. Just make a cardboard outline of the pup locations, and those can easily be transferred to a 175 or other pg you like. From there anyone can make one for you.

  4. #3
    Thanks....It does sound pretty simple...Knowing me, though, I am leery of doing anything that might mess it up..I'll give it a go, though..
    A

  5. #4

    User Info Menu

    Pickguardian | Quality Handmade Custom Pickguards

    I have worked with this guy previously. You might want to see if he can help.

  6. #5
    Thanks....I will definitely check them out.. I appreciate it...

  7. #6

    User Info Menu

    The positions for the ES-775 humbuckers are wider apart than the ones for the ES-175. Be aware of that. The L-4CES might be similar to the ES-775 in the positioning of the humbuckers. You might want to look for an L-4CES pickguard.

  8. #7
    Quote Originally Posted by Jabberwocky
    The positions for the ES-775 humbuckers are wider apart than the ones for the ES-175. Be aware of that. The L-4CES might be similar to the ES-775 in the positioning of the humbuckers. You might want to look for an L-4CES pickguard.
    Yeah, in looking at pictures I see the similarity with L-4 pickguard. I also did some checking on measurements. The ES 175 pickguard is 8" and I'm thinking the ES 775 is the same. I am awaiting arrival, so I'll sit tight until it gets here before ordering anything...This guitar weighs in at a hefty 8+ #, so, we'll see how it goes. Almost the same weight as my Gretsch CC...
    Stay safe, folks.
    a

  9. #8

    User Info Menu

    I also believe the 775 had a fancier 5ply tortoise pickguard gold brackets and as mentioned already wide pickup spacing.

  10. #9
    Quote Originally Posted by jads57
    I also believe the 775 had a fancier 5ply tortoise pickguard gold brackets and as mentioned already wide pickup spacing.
    o
    Thank you for the help....I'll find what I need....I appreciate it...

  11. #10

    User Info Menu

    I'd think anyone that works on archtops can make a bound pickguard one for you. The supplies from Stew Mac are less than $50.
    In Search of Pickguard for Gibson ES-775-screen-shot-2018-09-14-9-37-50-pm-png

  12. #11
    Quote Originally Posted by icr
    I'd think anyone that works on archtops can make a bound pickguard one for you. The supplies from Stew Mac are less than $50.
    In Search of Pickguard for Gibson ES-775-screen-shot-2018-09-14-9-37-50-pm-png
    Great to know...thanks..

  13. #12

    User Info Menu

    The materials aren't especially expensive, but making a quality bound pickguard requires a significant investment of time, and I once heard that time is money. Don't be surprised if the quote is a lot more than $50, or if the person decides it's just not worth the trouble.

  14. #13

    User Info Menu

    I made L5 and all types of pickguards and the materials are expensive as such. They sell really nice replacement L5 pickguards between $55-$85. For me to make one for $75 is not really a great deal for myself. The materials cost about approx $25 per guard and it takes me at least two hours of work in total time. So getting $25 and hour sounds like a lot to some but not something that is a big money maker. The person still has to drill the holes in many cases and put the guard on. To really make it worth my time need to get $100. Making pickguards is not complicated but it just does not seem to flow either. Compared to a fret dressing or crack repair it is much more hassle. Certainly I am not the most proficient either.

    I think those of us making these custom do better on specific request like a D'angelico Pickguard or some shape that is not quite up to specs. Another option is the material, as I found a source for really nice tortoise that is thick. It is 3/16's thick and looks fabulous but really best used on guitars that are acoustic archtops with a floater. This stuff holds up under the mounting of pickup and volume control on the guard much better. I also use these for the D'angelico style. The thicker material is much better to bind.

    For the run of the mill L5 guard you can't beat ebay and those sellers selling them for really inexpensive amounts. I have not idea how they do it and make a profit. I had to hunt down some binding cement directly from manufacture. I am glad is US made otherwise probably could not ship the stuff.

  15. #14
    Quote Originally Posted by deacon Mark
    I made L5 and all types of pickguards and the materials are expensive as such. They sell really nice replacement L5 pickguards between $55-$85. For me to make one for $75 is not really a great deal for myself. The materials cost about approx $25 per guard and it takes me at least two hours of work in total time. So getting $25 and hour sounds like a lot to some but not something that is a big money maker. The person still has to drill the holes in many cases and put the guard on. To really make it worth my time need to get $100. Making pickguards is not complicated but it just does not seem to flow either. Compared to a fret dressing or crack repair it is much more hassle. Certainly I am not the most proficient either.

    I think those of us making these custom do better on specific request like a D'angelico Pickguard or some shape that is not quite up to specs. Another option is the material, as I found a source for really nice tortoise that is thick. It is 3/16's thick and looks fabulous but really best used on guitars that are acoustic archtops with a floater. This stuff holds up under the mounting of pickup and volume control on the guard much better. I also use these for the D'angelico style. The thicker material is much better to bind.

    For the run of the mill L5 guard you can't beat ebay and those sellers selling them for really inexpensive amounts. I have not idea how they do it and make a profit. I had to hunt down some binding cement directly from manufacture. I am glad is US made otherwise probably could not ship the stuff.
    I found something on ebay and jumped, then learned that the material should be tortoise, not black. THere are a few others out there on Reverb and ebay..I think I'm putting the cart before the horse, anyway. I need to have the guitar in hand first. Then, I can do some measuring....
    But, upshot is I think I'll probably go with something already made rather than have one custom-made. It isn't worth the $$ to me...
    THanks for the help.

  16. #15

    User Info Menu

    This is the material I used for the pickguard in post #10. It was enough to make two pickguards.

    Tortoise Pickguard Material for Archtop Instruments | stewmac.com

    Even if you don't make the pickguard yourself, this video will show what is involved, though everyone does it a little different.

  17. #16

    User Info Menu

    WD® Custom Pickguard For Gibson® L-4C®

    #05T Tortoiseshell Solid (Semi-Transparent) $49.95.

    It is unbound and you will have to make the cutouts for the humbuckers yourself. In a pinch, this will do very well.

  18. #17

    User Info Menu

    Gibson L-5CES electric guitar pickguard dark tortoise shell with 5-ply binding | fox-guitars.com

    You might want to measure between the pickups of the ES-775 and see if the spacing matches that of the L-5CES pickguard.

    You also could ask Paul Fox for a quote on a custom job.
    Last edited by Jabberwocky; 04-02-2020 at 05:07 PM.

  19. #18

    User Info Menu

    Quote Originally Posted by icr
    This is the material I used for the pickguard in post #10. It was enough to make two pickguards.

    Tortoise Pickguard Material for Archtop Instruments | stewmac.com

    Even if you don't make the pickguard yourself, this video will show what is involved, though everyone does it a little different.
    I don't do it that way I use strips and binding tape. One layer at a time and there are even other ways to do it.

  20. #19
    Quote Originally Posted by icr
    This is the material I used for the pickguard in post #10. It was enough to make two pickguards.

    Tortoise Pickguard Material for Archtop Instruments | stewmac.com

    Even if you don't make the pickguard yourself, this video will show what is involved, though everyone does it a little different.
    Looks pretty cool to do...If I had the inclination, I might go for it...A few years ago I would...Now, I just want to spend time toodling around on my guitar. I did order one (black) for a seller on ebay. If it works out size way, I may use it as a template to attempt to make one. I did pick up some tortoise plastic a few years ago for something or other...It's sitting in the attic amongst all my other guitar-fabricating (never used) junk... Cool stuff. Thanks..

  21. #20

    User Info Menu

    apell, I have been down this route before. In trying to save money I tried to craft my own solution. What I ended up with was a bunch of botched up materials to show for it that could have paid for a proper custom made pickguard. No savings and I still had to shell out for a proper one.

    You need a buffing wheel to give the tortoiseshell celluloid a nice shine. Not trying to discourage you but I see you going down the same path. Just leave it to the guys who do this for a living. Less frustration for you unless you wish to learn to do it for a living or have many guitars which require pickguards. Of course, if you are not particular, a black pickguard with no binding and cutouts made by a coping saw will suffice at low cost. But I get the feeling that you want a nice pickguard.

  22. #21

    User Info Menu

    Well said, Jabberwocky.

    Also, when buying one: Caveat emptor. The quality of some of the ‘homemade’ pickguards on reverb and eBay is horrible. Go with a known supplier or builder. Apart from having the correct materials and tools, it takes knowledge, skill and experience to have a good quality outcome. Not saying it’s beyond any of us, but unless this is something you plan to do a lot of, my feeling is it makes much more sense to buy from someone with a good reputation. I have a couple simpler pickguards (ES-175, Epiphone Emp Regent) from Pickguardian and they are excellent. But for a bound pickguard, go with quality. If you want an off-the-shelf option, I haven’t found any better than the Allparts L-5 pickguard. Stock comes and goes (be patient) but they are top notch.

  23. #22

    User Info Menu

    You may want to contact Joe over at Archtop.com. A few years ago he made up an excellent ES-175D pickguard for my 1961 model which had none when I bought it a few years earlier. The service was fast and the quality high. I've seen a few 775s on Archtop.com over the years so I would expect Joe has probably made up a template "just in case".

  24. #23
    Quote Originally Posted by Jabberwocky
    apell, I have been down this route before. In trying to save money I tried to craft my own solution. What I ended up with was a bunch of botched up materials to show for it that could have paid for a proper custom made pickguard. No savings and I still had to shell out for a proper one.

    You need a buffing wheel to give the tortoiseshell celluloid a nice shine. Not trying to discourage you but I see you going down the same path. Just leave it to the guys who do this for a living. Less frustration for you unless you wish to learn to do it for a living or have many guitars which require pickguards. Of course, if you are not particular, a black pickguard with no binding and cutouts made by a coping saw will suffice at low cost. But I get the feeling that you want a nice pickguard.
    Yes, I certainly don't want to wind up with a glooey mess, like one of the model cars I used to make when I was a kid. Thanks

  25. #24
    Quote Originally Posted by rolijen
    Well said, Jabberwocky.

    Also, when buying one: Caveat emptor. The quality of some of the ‘homemade’ pickguards on reverb and eBay is horrible. Go with a known supplier or builder. Apart from having the correct materials and tools, it takes knowledge, skill and experience to have a good quality outcome. Not saying it’s beyond any of us, but unless this is something you plan to do a lot of, my feeling is it makes much more sense to buy from someone with a good reputation. I have a couple simpler pickguards (ES-175, Epiphone Emp Regent) from Pickguardian and they are excellent. But for a bound pickguard, go with quality. If you want an off-the-shelf option, I haven’t found any better than the Allparts L-5 pickguard. Stock comes and goes (be patient) but they are top notch.
    I believe I contacted them yesterday, and they ARE indeed waiting for bound tortoise to arrive. I have them on my radar (now, if I can only remember to check on them in a month.)
    Again, thanks for all the help, folks.
    Be safe..

  26. #25

    User Info Menu

    Years ago, I got one custom made by Cris Mirabella. It was a pre-emptive replacement for the original bound tortoise guard on my Byrd, which had not yet begun to deteriorate. (That original guard is now tucked away safely in a sealed plastic bag.) Cost $300 including the labor by my luthier to mount the block and hardware and do a little custom fitting to the guitar itself (I believe he ordered it without pickup cutouts and did those himself to ensure proper fit to the specific guitar.) Expensive, yes, but is a dead ringer for the real thing and is impeccable in workmanship.