-
It seems that almost everybody on this forum uses tomastik strings. So I've been looking for them here, but it turns out that they simply do not exist in Argentina
Anyway what would be the next best alternative?
-
01-14-2012 12:47 PM
-
you can buy them on line.
-
Thomastik are very overpriced imo - and I found their flats OK but far from brilliant. People swear their rounds (bebop series) are great but I have never tried them.
I just love John Pearse rounds Jazz set on my archtop - quite cheap, last for a good time and sound and feel awesome. Peter Bernstein uses them so... I also like La Bella Jazz Rounds on my 335 a lot and feel they are much better than DAs for example - but they are a little more expensive although they bring an extra 1E and 2B strings.
I will try La Bella and John Pearse on my two acoustics also in the near future. Are you looking for flats or rounds? What brands are available there?
-
It's much the same situation here in Norway. Stores only carry gear for rock musicians.
I order my Thomastiks online. When I buy a lot of them, it makes up for the international shipping cost.
Other brands that sound good? I'd say Benedetto strings or La Bella(I think this one is owned by Benedetto too), but if you can't get Thomastiks in Argentina, then it's unlikely that you're going to find any other jazz string brand.
But I'm just guessing from how the situation is over here.
-
La Bella is not owned by Benedetto I thinl - but I am almost positive they make Benedetto (and Sadowsky) strings.
I use juststrings.com The euro-dollar conversion, cheap prices and the amout of available strings make up for shipping, fees and VAT. I always order in big quantities and also a lot of 1E and 2B replacement strings to make the sets last much longer.
Also heard good things on Newtone strings.
-
I also use juststrings.com for strings and picks: good selection, good prices, fast shipping.
-
If you dont want to order online maybe you could give us a list of what you can get and we will comment.
I am in Montreal Canada and my selection of strings isnt great so I order from juststrings.com or stringsandbeyond.com (both are excellent, but I have to choose the ones I want).
Also, what are you putting the strings on and what are you looking for for sounds?
On my Epi EmpReg (that i only play unplugged) I used Thomastiks for a while but I really loved the bright new string tone. That tone went away after a month so I was replacing the TIs too often. Newtones are also a great string (I tried them after the TIs ) but squeaky. Now I use LaBella black nylon wound flats.
On my ES165 (which I play plugged in) I use Chromes. I hated them for a long long time but on the ES165, for me, they work.
-
I'm afraid that ordering online is out of the question. The last time I did that the local customs charged me 110% on top of the price and held on to my items for like 6 weeks. Have heard many similar or worse stories (not receiving your items at all). So I just can't go there..
And well.. It's for a telecaster which I am planning to equip with a humbucker or p90. I just wan't it to sounds as jazzy and fat as posible. Dificult to say what sound I want. The guitarists whose sound I like the most tend to play hollowbodies (which for now I can't afford) and use really expensive amplifation, so I know I'll never get that sound.
Anyway I really dig Scofields sound in particular on albums such as Time on my hands and Meant to be. But I also dig older sounds.
-
Given your description of the situation, you probably want to just look for whatever medium to heavy gauge nickel flat-wounds you can find locally. Try what's available. What else can you do (unless you make them yourself, of course)?
Last edited by M-ster; 01-14-2012 at 09:50 PM.
-
In my opinion d'Addario Chromes are the next best alternative in terms of flatwounds. For a while they were my favorite strings on archtops and i still think they are great. I agree that the TI Benson strings are overpriced but they also sound fantastic.
The TI Bebop strings are fabulous too. It really depends on the guitar which ones fly better. In terms of cheaper alternative roundwounds some heavier d'Addario pure nickel strings sounds nice imho.
Good luck and i hope the situation in Argentina improves!
-
I agree that any medium flats should give you what you want - I know I have tried some brands I liked more than Chromes but I don't remeber which ones anymore.
-
pyramid
they made some nickel flatwound strings that I found very similar to thomastick.
to me pyramid's sets are more balanced than TI.
-
+1 on Pyramid. I also like Benedetto strings and Sadowsky strings.
Originally Posted by gianluca
But if Argentina Customs is so bad, others have already said the answer: buy whatever you can.
aniss, since you like Sco's sound, he uses fairly heavy strings on his Ibanez (13's, I believe), so experiment a little with different gauges.
Marc
-
Originally Posted by gianluca
A bit more pricey too...
-
Get someone you know abroad to send 2 or 3 sets to you, maybe with the word "gift" written on the envelope? Originally Posted by aniss1001
-
I also buy according to local availability because I didn't want to mess with filling out forms and paying shipping costs, etc...
So I used D'addario flatwounds Chromes in .12s for the longest time and they worked just fine for me.
However, more recently, I've become fond of playing these:
They're more lively and easier on the fingers (less tension), but not too bright. They still have a nice thick jazzy sound.
They're very common in stores (well, here at least), and they're less than half the price of Chromes.... And about 1/4 the price of Thomastiks.
To tame a Tele though, you might be happier with the Chromes. They are incredibly dark sounding, and practically last forever.Last edited by Retroman1969; 01-15-2012 at 02:58 PM.
-
I used D'Addario EJ21 12-52 quite a lot in the past.
But now I am using mainly 11-49. On the 175 I put 11-49 and then replace the little E-string with 012.
-
Hey thanks a lot guys..
And yes eventually I will have to buy what I can get. Just trying to figure which strings others have used and liked for jazz. Then I'll go see what is available of the ones mentioned here, rather than trying out all the different flatwounds can find. Well over time I might do that anyway but for now I needed to know where to start.
Currently I'm using .012 roundwounds. I wanna start using .013 flatwounds (a bit unusual for a tele but let's see how that works).
BTW several mention TI string.. Is TI a brand or what? Dunno what it means?
Ah and yes Scofield uses .013. I read an interview where he said he uses .013 UNWOUND strings so that he can bend. I suppose he is refferring to the upper 3 strings? Never heard of unwound before. Only ROUNDWOUNDS and FLATOUNDS....Last edited by aniss1001; 01-15-2012 at 04:20 PM.
-
He is probably meaning his 3G string is plain steel like 1E and 2B - making it easier to bend. Usually 3G strings on heavy sets are wound - round or flat. I am almost positive he uses rounds not flats.
TI = Thomastik Infield.
-
ti = tomastik infeld (sic)
-
Ah ok! That's what I thought too. So... If I go out and buy some D'Addario Chrome .013 I'll have to make sure that the "3G" strings (never heard that term before BTW) are unwound? I mean they come in both variants? Originally Posted by jorgemg1984
-
I used to use TI, but I tried a set of 012 D'addario roundwounds, and I find them to be a lot better for my taste. A stronger tone, great feel. The TI strings sound sort of dead to me.
-
I can sympathize with you because guitar stores in Spain do not generally stock string sets over 11 gauge and I have to order everything online. A friend from the USA occasionally sends me the odd set "as a gift".(Paypal!)
Anyway, depending on what you can find locally, these sets may be of interest to you:
-D'Addario Chromes (flatwounds), either 12 or 13 gauge. However, they seem to be a lot cheaper in the USA than elsewhere. Very smooth and mellow sounding, and I've had a good experience with these on both solid and hollow body guitars.
-GHS Nickel Rockers (Rollerwound Pure Nickel). There are 13 and, I believe, 12 gauge sets. They are sort of semi-flats. I didn't initially take to these strings, but they grew on me.
-Pure Nickel roundwounds in general are also maybe an interesting option because they have a warmer sound than the ubiquitous nickel PLATED roundwounds and less finger noise. They are made by several different manufacturers (Fender, for example) and in general seem to be reasonably priced.
Other sets which often get favourable reviews are: Gibson L5, GHS Brite Flats, DR Pure Blues...
Lastly, you may find 13s (13-56) a bit stiff on a Tele.
BTW, the D'Addario Chromes only come with a wound 3rd string. If you want a plain 3rd, you'll have to buy it separately, but bear in mind that in a 13 gauge set, you'd be looking at a very fat string to keep the balance. If you want to bend the 3rd string, stick with the 12 gauge set and try a 20 gauge plain.
I'm pretty sure Scofield doesn't use flatwounds.Last edited by Peter C; 01-15-2012 at 05:09 PM.
-
Allmost all 13 sets will come with a wound G - even some 12s should do that. I buy a special La Bella Blues Hard set for my Les Paul because it has heavy first strings but a plain steel G stock.
You're only chance to replicate Scofiled set will be to either buy all strings custom or to buy a 13 set and then a replacement G. Is there any place there that sells bulk strings?
Here you have Scofiled's strings
John Scofield Guitars, Guitar Amps & Effects
A custom roundwound DA set with the first three strings plain I guess.
Pete C: A friend of mine can buy custom DA sets in Vigo, they have all the gauges available there (he uses pretty heavey strings). Where are you in Spain?
-
Wow, so that would be a .022 plain string? Tanky! (No thanks!)
@jorge: vivo en la provincia de Valencia. I may be interested to see what the vendor in Vigo has to offer. Details?
Reply With Quote
Recommandations for Hollowbodies for $600 and under?
Today, 05:20 AM in Guitar, Amps & Gizmos