-
These are sweet guitars!
Old refin on this one, the BRW bridge is the only original hardware, but she's a keeper. Am desperately seeking a Dearmond 1100/1000 for reasonable $ if anyone has a line on one.
-
10-26-2013 06:18 PM
-
Beautiful. I'm sure it sound equally beautiful.
-
Originally Posted by Patrick2
-
Good looking L-7, DC Ron....
I bought my first L-7 several years ago....loved it and even got another.
They've been been my regular guitars ever since.
...Congrats!
-
And also remember, it was made where the heritage of arch tops began . . . 225 Parsons Street Kalamazoo, Michigan.
I have a very dear friend who has a NOS Dearmond 1000. The only reason it's no on my new build Super/Golden eagel, is because it's the 1000 and not the 1100. I needed the 1100 for the gold plating. But, the chrome (nickel?) will work perfectly on this L7. Also, do some research on the tonal difference of each of them. They are not one and the same pups.
If Stephen . . (Hammertone) is listening in, he knows these pups better than I do. Maybe he can help.
But, this 1000 model is brand new, in its original box and never installed. If you're interested, PM me and I'll give you the contact info.
-
Man . . . . I don't know who did that refin . .. but it's off the charts beautiful!!!!!!!
-
Dearmond used chrome plating (not nickel) and gold.
If Patrick's buddy wants to sell you a 1000 for cheap, grab it.
If not, I'd be happy to sell you a Dearmond 1000, or an FHCC, in Chrome.
I have Dearmond 1000 and 1100 pickups in Gold as well, NIB.
All for too much money, of course.
-
Congrats!
I always had 16" wide short scale archtops, but I bought a '49 L-7 last February and it is certainly the one that I play the most now.
I have limited first hand experience with the Rhythm Chief, but I do have a couple DeArmond FHC-B that sound very nice. It might be worth looking into them. You may like them and they are cheaper than the DA RC 1000 or 1100.
Looks like you have TI Swing on your L-7. Are they .012 or .013? (I find that these string sound very good and well balanced with the FHC.)
Patrick is right. That refin burst is beautiful.
-
Congrats, DC Ron. Re-finished or not, that looks beautiful. The re-finish is very well done. It looks like it just came out of the factory and I actually prefer the slightly lighter-coloured maple back.
Instead of a DeArmond 1100, look for a Kent Armstrong single coil floating pickup or have Kent wind you one that comes close to the DeArmond for $130. There is a smooth top version which is very thin and a 6-pole adjustable version.
Don't deprive yourself while waiting for a reasonably priced DeArmond 1100 to show up. The Kent Armstrong sounds great as it is.
Spiral, run, don't walk
(The going price on ebay for the DeArmond 1100 is about $650.00. ms64red, Mitch, is the go-to guy for the DeArmond. I won't pay more than what Mitch sells his DeArmonds for. rpguitar got his DeArmond 1100 neck-rod from Mitch, if I recall.)Last edited by Jabberwocky; 10-27-2013 at 01:46 AM.
-
Originally Posted by Jabberwocky
-
Originally Posted by Eddie Lang
-
Originally Posted by DC Ron
Here it is on my L-4C.
-
Hi Eddie,
I agree that you should save the original and make a cut-out in a modern replacement pickguard.
-
From what I see in the photos...DC Ron's L-7 doesn't have an original pickguard, so cutting a notch in the one he has shouldn't be too upsetting.
Another option is to consider a McCarty.....I'm quite pleased with mine.
ziz
-
Congrat's Ron! She's one stunning L7!!!
I envy you guys with the vintage archtop knowledge. If I possessed that knowledge I'd clearly have owned a vintage by now. There are too many pitfalls for a newb to go out and buy a vintage archtop.
Can't believe I beat you at owning several NC archtops though
-
Originally Posted by zizala
-
Originally Posted by 2bornot2bop
-
Originally Posted by Eddie Lang
Richard, thx for the info and pic. Have seen folks simply butt the treble side of the FHC to the unaltered pickguard. Am guessing you did this but couldn't get the high E string to amplify?
-
Originally Posted by DC Ron
-
Congratulations! That's a lovely L-7!
I think I might have its sister! Also a 1944, I believe. (SN 98519, if I'm squinting well.)
Last edited by Flat; 10-28-2013 at 03:18 AM.
-
Absolutely beautiful L-7! Have had a couple of them but a 17" body with a long scale neck is just too big for poor me. Well, I am more than happy with my 1949 L-4C now so all is good
I have had several DeArmond 1000's and 1100's but I seem to prefer the FHC's overall tone over them. Much warmer and thicker. Had some trouble with the high E string being far weaker than the other 5 but had that one solved. Tilted the pickup so that the treble side is in the highest possible position and the bass side nearly touching the top, then put a piece of aluminum tape under the 2nd and 3rd strings. Still quite bassy but nicely balanced.
Have fun with your new baby
-
Originally Posted by Flat
-
Originally Posted by TinaB
-
Not to crash Ron's thread too hard, but regarding adding pickups to these old L-7s…
What's the conventional wisdom regarding the DeArmond style versus a McCarty pickup+pickguard?
Obviously they are quite different visually. But apart from that…is one style warmer or better suited for a non-cutaway L7?
I thought that if I ever added a pickup to my '44 L7 that I would go with a Lollar-built McCarty pickup+pickguard combination.
Any problems or considerations with that notion?
-
Originally Posted by Flat
Peripheral Gear, NWD
Yesterday, 10:49 PM in Guitar, Amps & Gizmos