-
My next little project. Wish me luck! (I think that will be the primary ingredient...)
-
04-26-2014 11:56 PM
-
nice mold! what's the lower bout width?
-
Excellent! No luck involved, it's skill!
-
Originally Posted by fritz jones
-
Originally Posted by Scot Tremblay
-
Very Very Cool!
So...you're going to do all the carving? Where are you going to get the plates for the top and back?
Happy Carving
-
Originally Posted by Jehu
-
Originally Posted by edh
-
Good luck with your project!
Did you already build a guitar or is it a new experience for you ?
What kind of tooling do you have ?
I still have in mind to build me a guitar, but I'm not ready to make the step yet. I wish one day I'll make it.
Any specs to share ?
Keep us informed
-
Looking forward to following this! There was a build thread on the Tele forum that got me into building.
-
Originally Posted by 339 in june
In terms of specs, I'm keeping it fairly conservative for my first go. 17" lower bout, 3" depth, 25" scale, 1.75" nut, black/white binding, standard f holes. That's about as far as I've gotten.
-
Don't be afraid to ask questions from the folks here if you need. I haven't been here all that long but I've seen some talented makers posting here.
-
Thanks, Scot, I appreciate that. I'll need all the help I can get. I have also been chatting with a local luthier who has been very generous with his guidance.
-
Plannin' and Clampin'...
Carving is underway. Pics to come soon!Last edited by Jehu; 05-03-2014 at 12:47 AM.
-
Looking forward to seeing this! Is it going to be thinner top (Benedetto) or thicker(Gibson) Just played a Johnny Smith that sounded amazing!
-
nice planning and drawings.
Are you mapping the contours based on the traditional arching pattern?
-
Impressive. I'll be checking in regularly for progress.
-
Wow !!!
Building an archtop is one of my dreams. I'll follow closely your work.
Thanks Jay.Last edited by balthazar; 05-03-2014 at 11:36 AM.
-
Oh yeah I am watching.....
-
Originally Posted by jads57
-
Originally Posted by fritz jones
Thanks for the encouragement, all!
-
Alright, I'm going to call Scot's bluff regarding advice. I'm close to finishing the outside arches (pics to come, as promised!). I plan to cut the f holes by hand (coping saw), and I'm torn whether to do them now or after I have hollowed out the inner arches.
Pro: The f holes will be easier to position on a flat surface. There will also be less chance or anything tragic happening while sawing a thicker slab versus the thinner (almost) finished top plate.
Con: I anticipate the inner carving process to be a much more delicate procedure with two large, ornate holes in the plate. But having never done this before, maybe those fears are baseless.
Any thoughts from those who have archtop experience? And apologies for the cross-post to those who haunt the luthiery forums...
-
While I haven't yet carved tops and backs for guitars, I have for mandolins. Most folks will carve the inside first, as you guessed, removing large quantities of stock with two holes already there would make a difficult task more so. It also gives you the opportunity to get a good, consistent tap tone from the piece before you cut the f holes. Which then you can use the sizing of to further tune your top.
-
FWIW, I haven't built yet, but I've been planning and researching for a few years now. All the books I have and the videos I've watched on carving always show the F-holes done after carving (except for the recurve - that seems to be done after the instrument is almost finished). Eagerly watching your build.
-
Damn, called my bluff...
I'd suggest after, basically for the reasons above. Ease of carving without holes (it's easier than one would think to catch an edge of the hole while roughing out the shape. Maybe once having a few under ones belt it would be OK, but for the first I'd error on the safe side), easier to cut accurate holes in thinner material after carving and fine tuning using hole size...a little aside here: don't forget that even though the f holes look small they actually create a pretty big empty space in the top. Their size helps regulate the flow of air in and out of the instrument as it's played, kind of like a big bellows. I won't get into why this is important (too much space needed) but it is...
16" 1920s/30s L5
Yesterday, 08:44 PM in For Sale