-
This is a 2002 Comins Classic being offered for sale. It’s 17” at lower bout with 3-1/8 sides, with a 1.810 nut width. The neck is a soft D shape and it plays effortlessly like all Comins guitars. The tone is warm and woody with perfect balance across the fingerboard .The neck is straight and frets show little wear. The Arches are gracefully carved without any deformation The guitar has a few marks, most notably on the top near the tail pc. The remaining portion of top is clean. The back has one dot sized mark, and otherwise clean. A little finish chipping on side of neck, and little finish chip on headstock. When I received the guitar several years ago, it arrived with a top fracture ( not disclosed to me) under the tone and volume control, and I had my good friend John Monteleone re glue this area - which is all it needed. It’s been stable for many years. John said it the best sounding Comins he’s ever heard.
I consider it’s overall condition excellent minus. Overall it’s a gorgeous looking and sounding guitar. All of the disclosed marks were present when I purchased the guitar - and its been kept in my temperature and humidity controlled room for years. Asking price is $5700 - plus shipping - which is a very attractive price for this guitar.
International buyers welcome , but must provide the bar code label - no exceptions.
Payment is certified check or wire only . I’m in the NY area if someone would like to come play it.
No worries - I’m a long standing member and have extensive experience with Archtop guitars.
Here are some pics
Sent from my iPhone using TapatalkLast edited by QAman; 01-26-2024 at 04:45 PM.
-
01-26-2024 04:27 PM
-
A few more pics
Sent from my iPhone using Tapatalk
-
A few more pics
Sent from my iPhone using Tapatalk
-
That’s a beautiful guitar. Is the bridge compensated and if so, is the bridge saddle on backwards? I zoomed in, but I couldn’t tell.
-
-
QA is an incredibly trustworthy seller who has a wealth of knowledge at the highest levels of archtop history.
He is one of the rare collectors who is also an extraordinary player. So when says it’s good, it’s good. No doubtski, Steve is the real deal.
Best of luck with the sale, and buyers, this is a total risk-free buy.
Joe D
-
-
Yes, very reasonable price for a fine Comins instrument. Is the nut width really 1.81"? Also, what is the neck width at fret 12? If possible, could you measure the neck DEPTH at frets 1 and 10? Thanks!
-
The nut is indeed 1.810. The fingerboard width at 12th fret is 2.110, depth of fingerboard cross section at 1st fret ( measured to fingerboard ) is .815, and at 10th fret .925. The neck is very comfortable. Think of it as a bit wider than 1-3/4.
Sent from my iPhone using Tapatalk
-
Thanks very much for such a prompt response! Unfortunately for me, that neck's a little too wide and thick for my arthritic left thumb at this point - beautiful piece and I'm sure it sounds great, too!
-
-
For those wondering the scale length is 25”.
Sent from my iPhone using Tapatalk
-
Code name QAman is a guarantee for quality.
The neck width is ideal for me, but the distance, tax and transport to EU is my main problem.
-
Fal Tarlow
Thanks for the vote of confidence. I entirely understand the cost considerations - they add up quickly. Not sure if you ever played a Comins hand built guitar, but I can tell you the set up is superb. I was playing the guitar for a bit yesterday, and its very comfortable - and actually perfect for those who play fingerstyle Jazz.
Thanks for your interest.
Sent from my iPhone using Tapatalk
-
Someone is going to get a thoroughly vetted and perfectly set up Comins Classic at a very reasonable price from Steve. Whoever buys this guitar is going to be very happy with the transaction and the guitar itself. These Comins carved archtop guitars don't come up for sale very often. GLWTS, Steve!
-
Thanks for the very kind words Bill - very much appreciated. I rank Bill Comins hand built guitars at the same level of any Buscarino or Benedetto . I’ve owned them all. This guitar exudes a level of very fine workmanship - which is typical of Bills guitars. The top and back are tuned in such a manner as to produce a very warm creamy / round jazz blues tone - and the musical response to the lightest touch is just fabulous.
A Comins guitar is not the typical “ tight and bright “ sounding experience one encounters with many acoustic Archtops - it’s different in a very refined way.
To get a good idea of a fine sounding Comins - I highly suggest that anyone interested give a listen to some Steve Herberman YT videos.
Sent from my iPhone using Tapatalk
-
I’ll second your observations, Steve. Bill Comins does beautiful work. His craftsmanship is impeccable, his guitars play wonderfully, and they are fantastic acoustic instruments.
Sent from my iPhone using Tapatalk
-
GLWTS. Just out of interest, never having seen this before, what bar code label must international buyers provide?
-
-
Well it doesn’t get any better than this only fancier perhaps. Very attractive price,someone will be very pleased and lucky to own this beautiful instrument!
-
Now that is a beautiful guitar! I love it.
-
Bump for a great guitar from a great seller!
-
Fantastic price for a genuine archtop that I’d have a very difficult time parting with!
-
-
2b - Steve Herberman is a fabulous player- who really showcases the sonic attributes of Bills carved guitars. A hand carved Comins is a somewhat lighter build than many Archtops - with a low frequency back and a very responsive top. The neck angle is not too steep, so you get a very warm vibrant experience, and the playability and reduced fretting resistance is quite noticeable.
As you likely know - Bill is a phenomenal guitar player and his set up work is top notch.
Since D’Aquisto Fan bumped the post-I’ve had two people interested- and now it’s “Sale Pending” .
Thanks for your participation in the post - hope all is well.
Sent from my iPhone using Tapatalk
Julian Lage Trio - Sat 27th April - Marciac,...
Today, 03:57 PM in The Players