Hofner Verythin Standard - Red
Here’s the last new German-built Verythin Standard I have to sell. This one is New Old Stock from 2007 and has been resting comfortably in the main bunker. It has a gloss translucent red finish, anigree front, back and rims, flamed maple neck, end-to-end mahogany block, rosewood fret board and mother-of-pearl dot inlays. It's a striking guitar, with Hofner’s classic “lilies-of-the-valley” headstock inlays in mother of pearl.
It comes with an OEM Hofner hardshell case by Winter, made in Germany as well.
Price drop to $1,750 (from $1,950) plus shipping to anywhere. Payment by Paypal Friends & Family, check, bag o' cash.
Hofner reintroduced its iconic Verithin with the Verythin Classic, in 2000; and the Verythin Standard, in 2002. These German-made guitars have been made in very limited quantities - fewer than 500 Verythin Standards were made from 2002 to @2020, when German production of these models ceased, although lower-cost Chinese versions are still available. This particular guitar was a display guitar at the Hofner booth at the NAMM show, and I grabbed it for myself. I've gotten to that point in my life where I've decided that I don't need multiple Verythins. I'm keeping one Verythin Standard and one Verythin Classic. Specifications:
-Schaller tuners, nickel-plated
-tune-o-matic-style bridge & tailpiece, nickel-plated
-two volume, two tone controls, Hofner OEM knobs, three-way pickup selector switch.
-laminated anigree top, back and rims
-solid mahogany block
-maple neck
-dark rosewood fretboard
-Hofner’s classic “lilies-of-the-valley” mother of pearl inlaid headstock overlay
-25.25" | 25 1/4” | @641mm scale length
-1.25" | 1 1/4” | 31.75mm rim depth
-16 1/2" wide
-1.684” | 1 11/16” | 42.78mm nut width
-.845” | 27/32” | 21.46mm neck depth at first fret
-.882” | 113/128” | 22.4mm neck depth at twelfth fret
-“C” shape neck profile
-weight 3.09 kg | 6.8123 lbs
-medium frets, shiny and new, with ovalized ends - MANY hours went into this fretwork, which is gorgeous
-Schaller Straplocks, nickel-plated
-Hofner OEM vintage-style humbucking pickups supplied by Schaller, nickel-plated covers
-Neck pickup - @7.45 DC out
-Bridge pickup - @16.25 DC out
-Hofner OEM double-arched Winter German-made hardshell case
Condition:
The guitar has never been sold at retail.
It is as new, with no fret wear. And the frets are gorgeous - many hours of work spent on them.
There are a few tiny finish flaws around the tops of the f-holes, baked into the finish, and very minor discolouration of the clearcoat on the headstock, as shown in the pix. This is why I'm selling it for 2k as opposed to 2.5k. I've taken it out to play a couple of times over the years, so I can polish it up if you want. This particular guitar has a VERY thin finish.
Despite its passing resemblance to an ES-335, the guitar feels and sounds quite different - MUCH lighter, and brighter sounding. The longer scale gives it a much snappier sound - I’ve always considered these guitars as semis for Fender players. With a suede backed-strap, it balances fine. With a strap made of seatbelt material, not so much. It is so light that it's simply not an issue. Or install a Bigsby! Or I'll install a new Bigsby for you, at cost (I get them wholesale). When I did take this guitar out, I got more comments about it that any of my many other guitars - chicks dig big red guitars, who knew?
Over at Hofner, European-built Verythin Classics and Standards have disappeared from their website, along with all other European-built archtop guitars. German-built archtops are gone, after having appeared continuously since 1951. They won't be coming back anytime soon. Not a surprise, since they have literally made only a handful of any of them in the past few years.
Pix below. Plays great, sounds great, feels great, and so forth. And it weighs under seven pounds! Come on down!
Last edited by Hammertone; 05-13-2024 at 03:31 PM.
A rare bird indeed: a German made Hofner Verythin Standard with a mahogany center block! How do this sound compared to it's sister VTSs that have the spruce center block?
For there own good, somebody needs to buy this one from you, Hammertone!
I'll be in the US between Xmas and New Year's, and can ship from there to a US address for cheap.
What's that, trades? Yeah, sure.
I really don't need two of these, as well as my swell Verythin Classic. Here's my other Standard, which has a whopper neck:
Last edited by Hammertone; 01-30-2024 at 04:18 AM.
In the news, Höfner has re-introduced this made-in-Germany model in 2024, motivated no doubt by my fabulous success selling this one on this forum.
OK, let's celebrate that with a price drop from $1,950 to, what the hell, $1,750, with umlauts added FOR FREE. Someone buy this really great new-old-stock Höfner!
Where I was working, there weren’t enough police to deal with all of the crime, so a lot of people, not just musicians, felt emboldened to carry out acts of vandalism and theft, making threatening...
Hi Jimmy.
Firstly I wanted to thank you for making this recording. It's become one of my all time favourite live recordings and is a real gem!! :-)
You mentioned in response to Graham above...
The Birdland sound can be very uneven at the start of livestreams. One instrument can be too loud, some can't be heard, it's often all over the place. It works out eventually, but it's as if there...
No one will believe me but I was just about to ask panasonic what his next song was going to be. True.
Hey, I don't get out of bed for less than $5. And some cornflakes.
Nice work, Graham. It think it sounds very 1932! Which is about 90 years ago.
I wonder if they'll still be playing, say, Rollins' version in 2115... and on what?
and I don't mean Jupiter
I get your point. And I did grow up in Kalamazoo. My mother's bridge partner was the CFO of Gibson. I used to visit the plant as a kid and more recently the Heritage factory. I grew up in that...
Billy Strayhorn voicings - VIDEO
Today, 08:32 AM in Comping, Chords & Chord Progressions