Hofner Verythin Standard - Red
Here’s the last new German-built Verythin Standard I have to sell. This one is New Old Stock from 2007 and has been resting comfortably in the main bunker. It has a gloss translucent red finish, anigree front, back and rims, flamed maple neck, end-to-end mahogany block, rosewood fret board and mother-of-pearl dot inlays. It's a striking guitar, with Hofner’s classic “lilies-of-the-valley” headstock inlays in mother of pearl.
It comes with an OEM Hofner hardshell case by Winter, made in Germany as well.
Price drop to $1,800 (from $1,950) plus shipping to anywhere. Payment by Paypal Friends & Family, check, bag o' cash.
Hofner reintroduced its iconic Verithin with the Verythin Classic, in 2000; and the Verythin Standard, in 2002. These German-made guitars have been made in very limited quantities - fewer than 500 Verythin Standards were made from 2002 to @2020, when German production of these models ceased, although lower-cost Chinese versions are still available. This particular guitar was a display guitar at the Hofner booth at the NAMM show, and I grabbed it for myself. I've gotten to that point in my life where I've decided that I don't need multiple Verythins. I'm keeping one Verythin Standard and one Verythin Classic. Specifications:
-Schaller tuners, nickel-plated
-tune-o-matic-style bridge & tailpiece, nickel-plated
-two volume, two tone controls, Hofner OEM knobs, three-way pickup selector switch.
-laminated anigree top, back and rims
-solid mahogany block
-maple neck
-dark rosewood fretboard
-Hofner’s classic “lilies-of-the-valley” mother of pearl inlaid headstock overlay
-25.25" | 25 1/4” | @641mm scale length
-1.25" | 1 1/4” | 31.75mm rim depth
-16 1/2" wide
-1.684” | 1 11/16” | 42.78mm nut width
-.845” | 27/32” | 21.46mm neck depth at first fret
-.882” | 113/128” | 22.4mm neck depth at twelfth fret
-“C” shape neck profile
-weight 3.09 kg | 6.8123 lbs
-medium frets, shiny and new, with ovalized ends - MANY hours went into this fretwork, which is gorgeous
-Schaller Straplocks, nickel-plated
-Hofner OEM vintage-style humbucking pickups supplied by Schaller, nickel-plated covers
-Neck pickup - @7.45 DC out
-Bridge pickup - @16.25 DC out
-Hofner OEM double-arched Winter German-made hardshell case
Condition:
The guitar has never been sold at retail.
It is as new, with no fret wear. And the frets are gorgeous - many hours of work spent on them.
There are a few tiny finish flaws around the tops of the f-holes, baked into the finish, and very minor discolouration of the clearcoat on the headstock, as shown in the pix. This is why I'm selling it for 2k as opposed to 2.5k. I've taken it out to play a couple of times over the years, so I can polish it up if you want. This particular guitar has a VERY thin finish.
Despite its passing resemblance to an ES-335, the guitar feels and sounds quite different - MUCH lighter, and brighter sounding. The longer scale gives it a much snappier sound - I’ve always considered these guitars as semis for Fender players. With a suede backed-strap, it balances fine. With a strap made of seatbelt material, not so much. It is so light that it's simply not an issue. Or install a Bigsby! Or I'll install a new Bigsby for you, at cost (I get them wholesale). When I did take this guitar out, I got more comments about it that any of my many other guitars - chicks dig big red guitars, who knew?
Over at Hofner, European-built Verythin Classics and Standards have disappeared from their website, along with all other European-built archtop guitars. German-built archtops are gone, after having appeared continuously since 1951. They won't be coming back anytime soon. Not a surprise, since they have literally made only a handful of any of them in the past few years.
Pix below. Plays great, sounds great, feels great, and so forth. And it weighs under seven pounds! Come on down!
Last edited by Hammertone; 02-22-2024 at 03:22 PM.
A rare bird indeed: a German made Hofner Verythin Standard with a mahogany center block! How do this sound compared to it's sister VTSs that have the spruce center block?
For there own good, somebody needs to buy this one from you, Hammertone!
I'll be in the US between Xmas and New Year's, and can ship from there to a US address for cheap.
What's that, trades? Yeah, sure.
I really don't need two of these, as well as my swell Verythin Classic. Here's my other Standard, which has a whopper neck:
Last edited by Hammertone; 01-30-2024 at 04:18 AM.
Well, hey, surprise!
I just came here to read about something else, saw this and guess what - today I also fitted JS112s to my '66 ES125 and - exactly the same: new guitar!
I didn't move the...
I have a 1st generation Parker Fly, never tried, and never needed to turn the rod. More Non-defining info, I know, but a data point on stiff necks and boards.
Thx guys. I should be ok with my existing sounds in my brick and mortar instruments for right now - my organ, and then bass, vibes, rhodes and piano sounds on my digital piano. But I'll probably...
the 120 sounds very different from the 100 or 200. 100 and 200 are more similar. I have not a/b'd them but a friend of mine has both and says the 200 is much brighter. It's a thicker guitar too,...
Reverse! Reverse!
Is anyone else here the right age to be hearing the Cha Cha Slide voice saying that every time someone mentions learning the tune in reverse order now?
No?
Anyone?
…..
Hi,
I've had my full TF subscription for probably as long as TF existed, and recently 2 fantastic jazz comping courses came out that some of you may be interested in.
John Pizzarelli's Jazz...
Haha exactly. I think it's cool that even though our micro generation came of age around the millennium, we were still the last to experience olden type society. I was born in 85 and I remember...
2 new & excellent Jazz Comping Truefire...
Yesterday, 10:22 PM in Comping, Chords & Chord Progressions