-
strugging to find anything thick or wide enough?
-
04-04-2021 09:07 PM
-
You can get blank ebony fingerboards and glue them together to get them the correct size. The glue line is not really noticeable and that works fine. Cheaper too than trying to find large ebony pieces.
-
I had a replacement pickguard made for my GB10 from headstock veneer from LMI. Just the right thickness and wide/long enough for my purposes.
-
Made this one for my Furch G-1 from a Meranti-slat from the hardware store and dyed it with black permanent marker ;-) (would use black leather dye now)
Last edited by Little Jay; 04-05-2021 at 06:52 AM.
-
Rockler Woodworking. They carry most species of legal wood. If you don't have one near your town, you can order online.
Woodworking Tools, Hardware, DIY Project Supplies & Plans - Rockler
Exotic Lumber at Rockler: Padouk, Bubinga & Purpleheart
-
Originally Posted by Little Jay
-
Originally Posted by Cunamara
-
Originally Posted by kris
-
Originally Posted by Woody Sound
-
Originally Posted by jzucker
-
i may just go with a tortoise-shell plastic if I can't find the ebony. Ironically, that's really hard to get these days...
-
Really hard to get.I found in Poland these:
https://www.henglewscy.com.pl/sklep?...ctList&cid=266
-
Originally Posted by kris
Error Page | eBay
-
oops, i just realized that macassar is only 2.5" wide so it won't work.
-
Originally Posted by jzucker
Sorry! Something went wrong!
-
Originally Posted by Woody Sound
-
Gilmer has some malagasy ebony boards that I'm pretty sure are big enough
Roughly 1 x 4.25 x 14
Gilmer Wood Company
-
You may just have to compromise. Life can be tough.
I built a couple of 3-inchers for my archtops and at my age never looked back.Last edited by Woody Sound; 04-06-2021 at 08:46 AM.
-
Originally Posted by jzucker
(You don't have to choose just the Gibson shape or color either.)
For example, my El Rey 4, wearing a homemade Zircote guard:
-
Originally Posted by Sam Sherry
-
Originally Posted by jzucker
most of these are 7/64" thick, which was almost exactly the thickness of my original pickguard. I chose cocobolo as the color very similarly matched the original pickguard on my GB10; Matt Cushman made it for me.
Npgd
Ebony:
Ebony, West African headplate, 1st grade
That's the same size as the blank for mine, IIRC, but I don't know how your original compares to the GB10.Last edited by Cunamara; 04-06-2021 at 12:58 AM.
-
Jack,
Gary Hines, in Oregon, made me a bound, thick, black ebony L5 size pickguard for my Heritage Eagle half dozen years back. It is beautiful. You might check in with him. He might have some ideas.
Steve
-
i found some peghead overlay stock on ebay. Ordered some cocobolo and snakewood. The coco was $13 and the snakewood was $19. I would need my repairman to laminate these onto maple or plastic because they are fairly thin. The snakewood would be my first choice. I may use the other piece on another instrument...
It was cheap enough that if he declines, I'll just have him make me a tortoiseshell guard. Thanks everyone for your suggestions.
-
My experience with plastic being laminated under the back of a thin wooden pickguard is that it's very prone to static electricity crackles when rubbing the wood. OK, that just doesn't sound good, but you know what I mean. What kind of plastic is used may be an important factor; perhaps summers less likely to have static electricity problems.
-
Originally Posted by Cunamara
Billy Strayhorn voicings - VIDEO
Today, 08:32 AM in Comping, Chords & Chord Progressions