-
If you do the neck out of one piece of wood, you'll waste close to half your wood. Unless you do it the Fender way, which uses stock wood sizes intentionally. The scarf joint is the only sane way to do it these days.
-
08-08-2020 04:46 PM
-
Neck in the rough
-
Originally Posted by lawson-stone
As illustrated in the diagrams below, the "a" one piece design creates short grain lines running diagonally through the peghead - this makes for an easy "snap" at the break angle below the nut.
In scarf joint "c", stronger long grain lines run through peghead and into the area below the nut - it's a less break-prone construction, but I don't like it for a couple of reasons - the joint is visible on the back of the neck, and you end up with two different grain orientations at that end of the neck - makes me concerned about possible distortion in that area, so I don't think it's the best option.
I like scarf joint "b" - using this method, the visible joint ends up in the peghead area, and front and back peghead veneers can be applied which both conceal and strengthen the splice joint.
-
trussrod & channel must be entered into equation as well
cheers
-
Originally Posted by MCampellone
-
I am a huge Gibson fanboy but dislike their lack of customer focus and concern. LOL when you have a issue with your Gibson.
On the other hand you can get a equally great archtop made by a equally great guy who will give great customer service for way cheaper. A no brainer. The "G" on the headstock is the stigma that is hard to get past but once you do you will find that a "C" on the headstock is really quite delightful.
BTW - I am Mark's new PR guy. I even get a new Campellone T-shirt too. :-)
-
Originally Posted by sgosnell
There's no shortage of hard maple (acer saccharum) out there, which is what is used for maple guitar necks. It's burned as firewood in the northeast.
-
Originally Posted by vinnyv1k
but "the time has come," the Walrus said .......and few could disagree with your opinion on the Campellone guitars, or of Mark himself.
We all appreciate good quality, Mark's guitars have it in spades, I would venture to suggest that his name will be revered for a considerable time.
There do not appear to be any detractors. Mark's regular posts on the progress of the builds is very interesting to not only the recipient but a
large contingent of genuinely interested members here. The icing on the cake is the very agreeable cost, because for even hard and fast fans
of Gibson , most will shrink from the very high prices, long wait, and the indifferent attitude of the maker to its long term and loyal customers
over and out, 007
-
Even Mr.Campellone cannot deny that no one can beat the Gibson designs so he just took the ball and ran with it. Actually all archtop makers did. I think the L5 is the benchmark that every guitar maker tries to equal or exceed in the archtop world. Not a easy task.Not only is the L5 a benchmark for the builder but it is for the player too. Campellone would not sell many guitars if they didn't exceed that benchmark. A archtop player is the most pickiest guitarist followed next by a really good classical player. We are a hard to please breed indeed.
Last edited by vinnyv1k; 08-19-2020 at 08:02 PM.
-
Neck almost done
-
This Guitar is really worth waiting for, Mark's expertise, patience ,and undeniable
skills as a Master Luthier., will make this the best instrument i have or will have
owned. It is a joy to watch the build process, and my sincere thanks to my very
good friend Vinny., for taking time out to post these great pics and for his recommendations
If anyone here is seriously desirous of owning a Campellone, I suggest that you contact
Mark soon, before the waiting list gets very much longer,
A happy camper? a resounding yes.
Silverfoxx
-
That neck has more stripes than a Bengal Tiger. I have yet had to touch the trussrod on the V1K model. Still arrow straight. My Special 1 crank and that was it. Campellone necks are super stable. At least for me, 100 degrees or 50 the necks don't move. Also dual action trussrods equal feeler gauge action. Perfect crowns and not even a hint of a scratch on the fretboard or binding edges. 007 when you sight down the neck it will look like a ocean horizon. No Gibby tailrise guaranteed. Words you will NEVER hear ever : My new Campellone is a turd. Words you WILL hear : Wish I got one sooner.
-
It is so nice to see your unbridled excitement and happiness.
I am very happy for you Foxman.
JD
Originally Posted by silverfoxx
-
+1
-
"unbridled enthusiasm" -kramer
for silverfoxx
cheersLast edited by neatomic; 08-19-2020 at 10:47 PM.
-
Neatomic.
Your post is a fair facsimile of my image in excited mode LOL
Best, Silverfoxx
-
Neck complete
-
A controlled repeatable process of excellence. I’m in the manufacturing business and when you have a controlled process - you have outstanding quality and predictable scheduling.
-
The new Campellone batch naked
-
Ready for Lacquer
-
Originally Posted by vinnyv1k
-
Vinny & Mark
i am already salivating at the prospect of receiving this guitar , even “nude” it is impressive .
When the lacquer is applied , and fittings it’s going to be stunning I know for sure
Thank you for these pics and for the hard work entailed in producing these
beautiful instruments
Silverfoxx
-
I like the OCD lineup:
-oddball Standard Custom
-Standard
-Deluxe
-Special
-Cameo
-
Sealer coat. Flame Monster
-
I am not surprised that there are so many views on these posts, to see a work of art in
progress is fascinating, If Mark C was IC of production and Vinny IC of public relations
at Gibson. it might be a different story, fortunately for us they are not. We are therefore
enabled to acquire a masterpiece at what is considered to be a realistic price.
Each stage of this build is an eye opener, Thanks again to Mark, and Vinny for a view
of these fantastic guitars in production.
Silverfoxx
Heritage Johnny Smith incoming
Today, 09:26 AM in Guitar, Amps & Gizmos