-
Just picked up my newly acquired ES-125 from the luthier this afternoon - got it re-fretted, new nut, pickup shimmed up, sound post installed, and the tailpiece grounded, as well as set up with Thomastik flatwounds
The only thing left is to find a pickguard and some knobs
who makes a decent looking repro guard? There is a guy on eBay who has decent prices but no real pictures of the material he uses
ES-125 Transparent Tortoise W/1-P90 Pickguard made for Gibson Guitar Project NEW | eBay
i am thinking of using these knobs - they look pretty nice but aren’t the “tall barrels” that I believe this guitar would have come with:
"Art of Aging" "CAB" Gold Speedknobs (4)
Any help would be greatly appreciated!
-
03-18-2020 11:31 PM
-
Those knobs should be ok, they'd be 'period correct' on a 50s guitar.
I'd look for a black guard like the originals.
-
My '59 125 had no longer its pick guard when I bought it.
My quest for a replacement ended up the Ebay seller the OP is mentioning.
From the ad: "... We also had a customer inform us that this will not fit a 1959 ES-125"
I am the customer he is referring to, as the p90 cut out and the holes for some reasons were not fitting my 1959.
However, at their request I sent back the pickguard and ended up getting a non cut one and I did my own cut out and holes.
The material is very high quality transparent plastic very similar to celluloid minus the potential gassing...
Its a little bit more on the yellowish brown than the original reddish tortoise.
-
Originally Posted by wintermoon
-
The luthier doesn't know how to make a pickguard?
-
I think you're right about that, I guess I'm basing that on so many repros in black I've seen, and yes to the knobs
-
I think I have a real NOS ES-125 pickguard around here somewhere, in my box of many NOS Gibson pickguards.
I'l go look for it...
-
I can attest that the aged speed knobs you link to look good, a set on my 1961 ES-125DC
My Brother made the replacement pickguard, more the 175 look, with a nice piece of thicker repro tortoise. looks dark in the photo due to the flash, but nicely translucent in real life.
-
I recently put some of those gold speed knobs on my 1970s ES175. I expect they are not ‘period correct’ but I couldn’t give a **** about that, I just need them to turn easily and work.
Previously it had those black ‘witches hat’ knobs, I hated them. They wouldn’t turn very easily with my little finger (due to the narrow radius, it gives poor leverage), also they were quite fragile and easily broken.
The speed knobs are superior in every respect.
-
I got a period correct transparent tortoise pickguard from Mike Crocker, Crocker Custom Guitars, Aptos, California. He also has hardware. I bought a '53 style for my 1946 125. Good transaction. You can Google him.
-
Another vote for a black guard even if it’s not original. I have a 64 and use the original guard as a template to make a 5 ply that looks soooo much better. But bring it back to original is cool too if that’s your jam…
-
Originally Posted by tfling
-
Originally Posted by garybaldy
i didn’t notice any difference in sound, maybe the slightest bit less acoustic volume, but both I and the luthier were surprised at the lack of difference.
-
I went with a 175-style 5-ply for My ‘67. It’s a bit thicker and sturdier than the period correct tortoise type.
I also find the original type flat bracket flimsier than the 175 type.
So mine is a Franken 125, which serves me better, fwiw.
-
No affiliation, but I bought an ES-125 pickguard from Mike Crocker, C-Rocker.com , Aptos, California.
Very pleased.
It was for my 1947, yes, a 1947!
One of the earliest, with original P90. Also needed tuners because the buttons rotted off. I discovered that you can buy new aged looking buttons, which I did and someday will put on the original gears.
-
Originally Posted by skykomishone
-
Cris Mirabella does great work, not cheap tho.
-
Originally Posted by DMgolf66
I bought the 'Vintage' style.
-
[QUOTE=skykomishone;1051832]No affiliation, but I bought an ES-125 pickguard from Mike Crocker, C-Rocker.com , Aptos, California.
Very pleased. /QUOTE]
I think I got my pick guard (pictured above) from the same source.
And I’m satisfied as well.
-
The last time I went through this exercise it involved lots of research to determine which knob Gibson was using that particular year, and it turned out that most, including the one I needed, are not available as inexpensive repros, and real ones are stupidly expensive. Inexpensive repros that fit and look pretty close are widely available (I think the ones that were on late 50s Les Pauls IIRC). If you are able to find a reasonably priced repro of one of the rarer knobs, be sure and post back with pix.
-
Originally Posted by nopedals
-
Vintage Guitars Info - Gibson collecting vintage gibson guitars
scroll down about halfway down the page
I wanted the tall numbered gold knob (1950 to 1952) for my 1951 ES-150, but settled for repros of the "speed" knobs used from 1953 to 1955. which were widely available.
If someone is making repros of the 1947-50 or the 1950-52 knobs, I would be interested. Real ones, too, if someone has them at a bargain price, or wants to make a trade for something in my parts drawer.
-
Originally Posted by tfling
All I have is a Chinese 125 look-a-like which has a factory fitted sound post and no bracing. The guitar is quiet acoustically. I've never heard a 125 in the flesh but would love to do a comparison.
2 new & excellent Jazz Comping Truefire...
Yesterday, 10:22 PM in Comping, Chords & Chord Progressions