I was wondering if anyone can give me a suggestion for a guitar strap. I have a 1967 Gibson Super 400 CES where the pin for the guitar strap by the neck is on the body very close to the neck. Whenever I buy a strap I've had to trim the leather which makes the strap less secure than I would like. Since the guitar is vintage I don't want to move or add a pin. Can anyone suggest a strap that would work where the leather is very narrow at the level of the pin by the neck.
1. Go to guitar store store, local or online.
2. Buy new strap pin. Jim Dunlop makes a nice big one, that can even lock, Schaller has a reinvented version of their Straplock as well. I'm sure there are others as well.
3. Remove old pin. Put it in a bag and store it in the case pocket so it does not get lost.
4. Install new pin and any other associated hardware to strap if you choose the locking option.
5. Play guitar.
Because this is an entirely reversible procedure, you can always re-install the vintage strap button onto your vintage guitar.
Thanks. I appreciate the suggestion. Unfortunately, I don't think it'll work since I still have only about a 1/4" of space to the neck. I actually have a sturdy pin in the guitar but the width of material around the strap hole tends to be the problem.
If only 1/4" of room, personally I'd go with thinner leather but intentionally cut longer (i.e. more than 1/4") and have it fold up a bit at the neck. Thick leather likely wouldn't work well if you go this route.
I'd still go with thinner leather that is a bit too long and folded slightly up the neck, but I'd add a rubber strap ring (which you might have to trim).
I second the suggestions above to attend to the button and lock of some sort. I use a Gibson ASCL leather strap (securely thick) on my Super 400. The leather end extends 11/16 of an inch beyond the rim of the button. On top of the strap, however, I use a rubber lock whose rims are 5/16 of an inch wide--which would apparently be problematic for you.
The idea is interesting. I never thought of it but seeing what you did I wonder if I could build the pin up from the body by adding a piece of leather to give it some clearance off the neck. I wonder if it would have enough stability?
Before building the pin up from the body, I'd try to find one of the Levy's strap that neatomic suggested. Raising that pin could result in undue stress and pull or snap the pin from the body. No need to take that risk when a $30 strap might resolve your problem. And of course, another option would be to use a neck strap extenders like Sam Sherry suggested -- except use it the old school way by wrapping it around the top of the neck and connecting your strap to the extender up by the nut.
Here is a series of pix showing how the Dunlop system works.
Depending on the depth of the heel on your guitar, this system may allow your guitar strap to clear or nearly clear the neck heel and be more secure than a regular non-locking strap.
Note how the strap area clears the strap button itself.
I just wanted to thank everyone for their help with this. I ended up contacting Italia Leather Straps. I sent them a picture and a description of the problem and they modified the design of their strap so that it fit by changing the contour of the strap around the strap hole by the neck. They did a really nice job. The strap fits well and it is a beautiful strap. They were also kind enough to do the modification without any additional cost and I received the strap in 10 days.
I would highly recommend Italia Leather Straps. The straps are beautiful and the company is a pleasure to work with.
As an European, US made is as much imports as Made In Asia. There was a time when US guitars were head and shoulders above those of other countries. That time passed, at least when it comes to...
I can get to about 200-220bpm with my fingerstyle picking, but, with plenty of slurs.
Relaxation is the key to speed.
Here is a video of my fingerstyle picking.
Interesting info:
Radar System's thermionic valves (tubes) ran continuously for three months before being routinely changed.
Lots of these 'used' Radar System thermionic valves (tubes) were...
I've only ever tried 2 PRSs and that was decades ago. The first was briefly for a couple of numbers at a jam night. Didn't know what model it was. The amp was a Rivera. Both beautiful pieces of kit...
YMMV but for me the presence of teflon is a good reason to avoid them.
In my experience with a Tusq saddle the material gets scored very easily, possibly as easily as wood. That would suggest that...
No, I suppose that some vibration does get transmitted via the bridge too. But again, in a typical "pure" electric (aka plank) guitar you don't want the body to vibrate: all the string energy that...
The bass resonant frequency of some loudspeakers is temperature dependent to a degree because of the damping material painted on the cone surround. That might cause some combo tube amps to show a...
They've got both those wrong. Mind you, the maj7#5 and maj7#9 chords exist too but aren't on the list.
And it looks like the list was made before b13 was a preferred term. Also, I hadn't seen...
Cathodes need a few seconds to come up to temperature. One minute is plenty. A standby switch cuts the high voltage to the anodes, leaving the (generally 6.3v) voltage to warm up the cathodes.
If...
At a point in our lives, we decide if we're done with learning, and whether it's time to reap the rewards of all the years of preparatory study. If you think you have 20 years of life left in you, is...
They're justified in considering it's aggravating and I will stop. In case of any misunderstanding I don't believe being born French, or this or that, makes anybody superior. A core (not exclusively)...
Charlie Garnett - Franken Tele
Yesterday, 08:52 PM in Guitar, Amps & Gizmos