i recently bought a Guild X-175 Manhattan from the actual production series.
I love the neck and all the other specs, but i can't get along with P-90s. Thats the hard lesson that I learned with this baby.
Now I have the question should i sell it or switch the pickups to Humbuckers. I know there are only a view manufactures out there who have a exactly fitting pickup of the type P-90s with dog Ears but Humbucker inside.
One more thing that could be better is the feedback. But I think thats just with what you have to live if you love bigger jazz boxes.
What is it about the p-90 pickups that you don't like? Some day I would like to get a p-90 equipped archtop. Every one that I have tried I have liked - very cool sounds.
I always look at playability and the acoustic sound of a guitar first because if I like those the electronics can always be changed/upgraded. So if the guitar pleases you unplugged I'd keep it and explore the options for pups. I believe there's a company that makes a P90 cover to hold a humbucker but I'm not sure if it's just their humbucker or not.
Your guitar does not have P90s, but Guild's own version of them. Soundwise perhaps very close, but I think dimensions are different, so a humbucker-in-P90-cover might not fit without modification.
But the Creamery makes P90-sized humbuckers: The Creamery
Last edited by Little Jay; 04-15-2017 at 11:55 AM.
P-90 pickups are allright for me, but I wish the covers were black instead of cream white. They don't merge quite well with the guitar, they look like an afterthought...and still, humbuckers would be a better choice, IMHO.
Sell it and get the guitar that works for you. Better than guessing how the other solutions might sound and then spending the money to find out if you were right.
All these options, but you will probably need to modify something to get them to fit. If it's just drilling new screw holes, you'll be OK, but be careful and do it correctly. You may also have to enlarge the opening for different p/ups. Again, use care. Maybe a custom made unit? is what's needed, as the photo above shows, there are no "dog ears", tabs for mounting the P/up.
Last edited by Jimmy Mack; 06-18-2017 at 10:01 PM.
¿Maybe the same pickup in different configuration and mounting system?
Mounting ring screwed directly to the body and then the pickup screwed to the ring.
Just be sure and consider resale before you start modifying the top. A lot of "upgrades" on less expensive guitars will reduce resale value. I tend to agree with Jim Soloway. If you're not just completely enamored with everything else about the guitar, I'd consider cutting your losses and trying something else.
Another option might be to have someone install new insides to the pickups that are on the guitar now. When the Tone Spectrum pickup died on my 1951 Epiphone Zephyr Regent, Lindy Fralin installed a new pickup inside it.
i recently bought a Guild X-175 Manhattan from the actual production series.
I love the neck and all the other specs, but i can't get along with P-90s. Thats the hard lesson that I learned with this baby.
Now I have the question should i sell it or switch the pickups to Humbuckers. I know there are only a view manufactures out there who have a exactly fitting pickup of the type P-90s with dog Ears but Humbucker inside.
One more thing that could be better is the feedback. But I think thats just with what you have to live if you love bigger jazz boxes.
2 things: The pickups are not exactly shaped like p-90's so I don't think you can retrofit without some work. Also: I have the same guitar, and in the beginning I had some feedback problems. Here's how I fixed them: I took off the covers and unscrewed the 4 screws that mount the coil to the top. Then I added about 2mm of rubber hose (like the kind used for bike valves) to the screws so the pickup is now no longer mounted directly to the top. Put the covers back on - no more feedback!
The OP (from 4 years ago, I just noticed) was enquiring about fingerstyle single line speed and even mentioned Paco De Lucía. Thumb-only is a whole different thing and I know from my own experience...
The Phosphor Bronze strings still have a steel core so a magnetic pickup will work - just don't expect the same volume and tone that you'd get with "regular" electric guitar strings ....
There are...
Another thing to consider, even if it may not be the case here, there are factories in China that will build anything to your spec (Chibson, Ch'Aquisto?, Chagstrom? Chender?) including poorly done...
A new batch of Wilkie 18” and 17” archtops. Two each of his Atlas and Paramount models.
“Amazing guitars. One of the finest luthiers on the scene today. Works of art while being highly functional...
Hi all,
I am deciding between a new Epiphone JP Emperor II pro ($700usd) and a lightly used D’Angelico Excel EXL-1, MIK 2015 ($820usd) for my first Jazz Box. I consider myself in a beginner ~...
Kent Armstrong or Pete Biltoft would be my starting places. They might have some ideas about mounting, which looks like a challenge on that instrument, but don't discount good old Blue Tack as an...
I've owned the Fender D'Aquisto Elite twice. In between I briefly owned a Hagstrom Jimmy f-hole model from the same period as the one at ShopGoodWill. No contest: The Hagstrom wasn't close.
...
I spoke to Jescar and they think EVO is gone maybe for good. While it is better I can deal with the nickel silver but no stainless steel. If you get EVO then you make never get it again so they seem...
Wyatt Wilkie - New Builds
Today, 12:23 AM in The Builder's Bench