-
Excellent. Looks like it is coming along great!
I will look forward to seeing the finished beauty someday. I bet it will be great! What a rescue!
Here is my own L-7. It's 1944 or 45. I'm trying to find a clever way to mount this reissue DeArmond without using the neck rod attachment. I'd rather not drill a hole in the side of the neck. But I may surrender the fight.
Anyways, I hope you'll keep us posted.
-
09-01-2022 12:54 AM
-
You can use Blu-Tack or similar to mount the pickup. It's entirely removable, and holds the pickup in place securely enough. Whit Smith used it to mount a DeArmond FHC to his Gibson while touring. You can get a lifetime supply for under $10 on ebay or Amazon.
-
Thanks for the tip, sgosnell. I've been using the Blue-Tack stuff. It works well, but seems to eventually melt and loosen in warm weather and I find the pickup sorta dangling. I try not to use too much goop, and that may be the problem. More goop would probably be more secure.
On the upside, the BlueTack does clean up and come off the guitar without a problem. And it gives me plenty of opportunities to experiment with pickup location.
I've already broken three of the neck rods that come with the DeArmond reissue. The bend isn't quite right. It needs to bend more to the left, but snaps when I try to adjust it. Clumsy me. I attached the tab on the right of the pickup to the underside of the pickguard with a piece of a 3M mounting pad. That side seems to hold OK.
-
Those rods do break easily. I use a vise to hold the part with the holes, and bend the rod with pliers. The pot metal won't take much bending, and the holes create a really weak area. You cannot bend the rod there. The vise holds that part straight, and the bend only happens in the existing bend. Everything else needs to remain straight. Using one's fingers is a recipe for failure.
I use as much putty as necessary to get the pickup to the height I want. It may gradually move a little, but it's not at all difficult to replace it where I want it. IME too much is better than too little, as the excess can easily be removed.
-
Originally Posted by sgosnell
Sent from my iPhone using Tapatalk
-
Thanks again guys. Good tips on bending the rod. I've got a couple more I can try.
I also followed an idea someone else on the forum once suggested, and cut a carbon fiber "tongue" in hopes it might support the pickup, at least partially, and let the top resonate as much as possible. I have a spare pickguard to mess around with. The big idea is to smooth out and shape the edges; then attach the tongue piece to the bottom of the pick guard; mount the DeArmond on the tongue; and use the smallest dab of putty to support the left end of the tongue. There might not be enough room (between guitar top and strings) to pull it off. And I don't know what I'm doing. That rarely helps.
-
Originally Posted by ThatRhythmMan
-
The top doesn't really resonate much at that location, just in front of the neck. There is little vibration there. IME the guitar sounds better with putty fully under the pickup than just floating. But my opinion of good sound may not be the same as yours. It's not that hard to try multiple ways of doing it, though, and then deciding which sounds better to you.
-
Good morning archtop enthousiasts!
For my first post, i would like to share picture of my L-7 from 1947.
It has a repro pickguard as I didn’t want to modify the original one when I decided to add a DeArmond pickup that I recently purchased from Retrofret
The guitar has been cleaned and set-up with Thomastik 0.12 by Paris based Luthier Galerie Casanova.
Enjoy!
Eric
-
Originally Posted by EricS75
Keith
-
Originally Posted by floatingpickup
-
Originally Posted by icr
-
Originally Posted by floatingpickup
-
Originally Posted by Steph17
Hi ! this morning, i went to see my luthier for the next step of restoration. The varnish has been completely removed, the previous shade could not be completely removed from the wood without damaging.This should not be visible after applying sunburst shades.
I was very happy to see my old L7 in such a homogeneous state ! So now, giving up on a natural finish, I had to choose the details of the sunburst finish. I'm hesitating between a typical 40's dark sunburst or more modern, lighter... The varnish won't be glossy but satin
-
Originally Posted by skykomishone
Keith
-
Thank you Keith!
yes definitly a late 47 just before logo transition. The main point was to get a hand-made repro pickguard to fit the pick-up as I kept the original intact. The team at Galerie Casanova did a great job.
She sounds very sweet and big.
Cheers
Eric
-
Originally Posted by Woody Sound
-
Originally Posted by icr
-
Originally Posted by Steph17
wednesday Jan 4th 2023
Here is the result of finish just finished : sunburst with nitrocellulose satin varnish.
The reassembly will start after the tailpiece is chromed
Can't wait to play it again, after rebirth !
-
Originally Posted by Steph17
Hello,
I had to be patient ... I finally recieved my guitar yesterday ... Thank you Sylvain Zbinden, luthier in La Rochelle (France)
I am so happy to have restored beauty and nobility to this old lady.
Thanks to this forum's people who gave me some advices.
And now ....let's play !!
-
I still cannot understand the insistence of guitar collectors on having completely original finish.
-
Originally Posted by Steph17
-
...sound domos?
-
Originally Posted by sgosnell
-
Originally Posted by frabarmus
Please Recommend Me Some Beginner Solos/Heads to...
Today, 08:09 AM in Getting Started