You can play all 12 keys in one position (more or less) by starting on a different finger on strings 6, 5 and 4. I believe Jimmy Brunos book goes into detail on this. Probably the Mick Goodrick book as well.
If you play the chromatic notes C , C#, D ,D# , starting with the first finger, C uses 1, C# uses 2, D uses 3, and D# uses 4th finger. so start your major scale on that finger.
C major 1st finger 6th string (the 1,6 fingering)
C# major 2nd finger 6th string (2-6 fingering)
D major 3 rd finger 6Th string (3-6 fingering)
D# major 4th finger 6th string (4-6 fingering)
There's 4 keys right there
Now move that to the 5th string for notes F,F#,G,G#. Same thing
That's another 4 keys. (F 1-5, F# 2-5, G 3-5, G# 4-5 ) {finger-string}
the missing 4 can be found by moving down or up 1 fret for B and E ( A and Bb are up or down two positions.)
I'm pretty sure you can find these scale finerings posted on the site somewhere or maybe Matt has them on his site as a lesson.
easy--you just gotta know the notes that are in the scales...you can grab any scale withing a four or five fret range--just gotta know what the names of the notes in the scale are...for example D major is D E F# G A B C# ...we could find all of those notes starting around the fifth fret on the fifth string (D)A major is A B C# D E F# G#. here, you can start on the fifth fret on the sixth string.but we can find other scales in there too. do you know your major scales? a beginner's book on scales would give you all the info you need (or one lesson with a teacher) and the rest is fretboard knowledge.
I'm trying to learn scales and arps in one position as a learning tool; probably based off the position of the I chord. It's nice to see everything right under your fingers. I guess you could chord that way too if you knew enough inversions. I especially like playing my scales and melodies off the 6th or 5th strings starting with the little finger; on DO.
Don't short change yourself. You should learn the scales, modes and arp off of all fingers. I can rattle off dozen of voicings you would only see if you know the scale fingering. If you only use the 4-6 or 4-5 then you only see the possibilities to the left of the fingerboard, not the right.
i dunno if the video lesson I did of this is still on youtube but if you search on it 12 keys 1 position you should find it if I didn't take it down. It's how to play any key in 1 place on the neck
Good point John, I AM only playing to the left, primarily. I know chords and scales all over but I am having a hard time connecting everything!! For a relative beginner it's just helpful to me to see how everything can be contained to a few frets.
Within every 5 frets on guitar we have the range of 2 octaves and a major 3rd of the chromatic scale which is the parent scale of all scales.
Here is a chart of 12 major keys on frets 1-5 from the lowest note in the key to the highest within the position. The root notes are in bold.
Some keys are the standard fingerings while others are somewhat awkward but very playable using extensions and contractions.
12 notes - 120 frets give or take a few- scales are everywhere the guitar is a new instrument- like the piano- its in its infancy this is only the beginning of what can be done ,beware when a thinker picks up this instrument the world of music as we know it will be changed. (it might be you)
Yes, their first album was the best. Rod Stewart had his sights set on the toppermost of the poppermost and became a mediocre pop crooner rather than a great blues belter so Jeff would have left him...
I've been listening to "Shapes of Things" from that recording on a regular basis ever since my band played it in my high school's rock concert in 1972. Enduring.
I'm amused by this preciosity about headstock shapes. Epiphone has been all over the place, but so has Gibson, especially pre-war. Not to forget Yamaha (I love the SA2200 headstock, not others) or...
What, Donna Lee sportin' a cowboy hat and boots, maybe brandishing a whip to prod ya' all to play faster? That could be entertaining, and certainly a challenge to add country twang at a high speed....
Between the thinner semi-hollow Yamaha and the fully hollow archtop depth of the PM200, I can't imagine much similarity at all—past them each utilizing humbucker pickups (and those of surely...
Hi
I wonder if you can help me please.
i bought a new amp today, a fender 57 deluxe reissue.
I am getting that thing where there is an electrical buzzing until you touch the strings or a...
If I understand correctly the Steve Howes came with the L5-style bridge, the zigzag tailpiece, yellowed binding, butter bean tuners and a fat switch knob.
Like many people, there were 3 reasons I...
A '53 Aschado by Alfred Schaufuss, apparently (I assume they found a label or signature), and not for sale:
Aschado Jazz, Alfred Schaufuss, 1953 | German Vintage Guitar
I don't envy your precision measuring equipment, but boy do I envy the guitar! Unless the top and bottom E sound weaker than the rest, even after adjusting pole screws, I'd not be worried.
It absolutely depends on the guitar as a dearmond is a microphonic pickup so it responds to the acoustic environment.
I also could do a video comparing a vintage 1000 ( no polepieces ) and a...
Electrical buzzing advice sought please
Today, 02:35 PM in Guitar, Amps & Gizmos