-
Hi folks – I’m looking to sell some nice wood that, for one reason or other, I can’t use – various sizes and grades – figured maple billets, bookmatched figured maple caps for solid bodies, some spruce flattop sets – also some figured walnut boards and some figured maple fingerboard blanks. It would be way too time consuming for me to sell individual items on ebay – wondering if anyone out there might have an interest or can suggest outlets other than ebay – pricing would be very reasonable as my main concern is just not letting this stuff go to waste.
-
11-27-2023 12:10 PM
-
Why not just send an email to a list of luthiers about the situation?
-
Thanks for the announcement Mark! Some of the best wood I've had is from personal transactions with a story (a covered bridge that was demolished one spring when the CT river floated an iceberg into it. First growth red spruce that brought luthiers to the site. It was very special).
This is a nice community here that includes good lutherie knowledge. Thanks for thinking of the group!
-
After reading Mark's post yesterday, first came the initial " Gulp "...... Later I went to bed as usual, and finally got to sleep, but kept seeing this headline from an East Coast paper:
" Local master guitar builder winding down his commissions and preparing for his next chapter, relocating to the south of France > ( or Seychelles, or ? )
Gulp again !
: )
-
Hi Mark
I’m making high quality veneers and would be happy for any figured woods that could be used on 16-17” backs.
Billets of 250mm (9-10”) x 550mm (21”) would be good. Or there abouts.
I can get a book matched set every 4mm (0.16”) of wood, so a 20mm (.8”) thick billet, would give me 5 book matched backs.
Although to be fair, you’d probably be keeping such billets for making your own backs.
let me know what you have in that range please.
-
just a follow up to see you recieved my pm
-
Originally Posted by Dennis D
-
Originally Posted by jads57
-
Originally Posted by Archie
Btw, I'm curious about how you're cutting veneers - on a bandsaw?
-
Originally Posted by MCampellone
Hi Mark
Thanks ...Wish I could help ! Good luck w/ the ' inventory reduction'.
All the best in the meantime ! Take care . : )
Dennis
-
Hi Mark,
I’d be interested in some of the maple if they are suitable for solid body electrics. I’m just up the road in southern MA, I could save you the hassle of shipping. Please pm if you’d like to connect.
regards,
bill
-
Originally Posted by MCampellone
I’ll try and keep this brief because it’s a real passion project of mine and has been for the last 2 months. I could easily go on for ages.
I’ve made a special sliding carriage for my bandsaw. It operates much like a meat slicer in a dehli. I can choose the thickness and can slice down to .8 of a mm.
Here’s a picture of the prototype I made:
it’s designed to carry 250mm x 550mm planks/billets but can carry much bigger by changing the fence.
I also have a very big bandsaw. Not an industrial re-saw but the biggest type you would use in a woodworking shop. I don’t have a good pic of it but here’s the best one to hand.
I have special blades that allow for fast cutting and minimal waste. They have a special rake tooth to clear the cut (a small tooth between the normal ones).
I’m sure you’re well kitted for blades but I’d be happy to send you a set if you’re interested. In return you can send me a signed off cut of wood, to hang in my workshop
SuperTuff Fastcut Bandsaw Blades
I then have a large digitally controlled wide belt sander that can make any further adjustment in thickness (if required) and sand to finish.
I don’t have a pic to hand but it’s this model.
I have designed special vacuum beds to keep the veneers flat whilst being processed to achieve the maximum quality finish and thickness over the veneer. I’m trying to achieve tolerances of around 0.05mm per sheet. So about 0.001968504 inches.
I have endeavoured to make the finest re-sawn veneers in the world, for arched laminate production.
Here is an example of the veneers I’ve been cutting. It’s still early days but it’s all working out as planned. This is sapeli
Attachment 106854
I got 4 sets off of a plank the same size as the one on the end of the bench.
That other plank is for the matching sides.
I’m going to do a video of it all on my youtube channel and will post here. I just need to finish the new prototype.
If you have any more questions or ideas, happy to help and or to hear them.Last edited by Archie; 12-03-2023 at 08:25 PM.
-
Hi Archie - thanks for the pics and explanations - I've seen other pics of your set-up here on the forum - very impressive, and I always enjoy seeing shop tour stuff - some really nice equipment there, and your passion for perfection is quite evident! I'll look forward to seeing the video!
-
Originally Posted by MCampellone
I’m an imposter in this space and learning the hard way but having fun.
Hopefully I can hang in there and get to see it through.
Talking of perfectionism, your carved plates are a work of art. I hope to achieve the same level in laminate construction.
Your work certainly contributes to what inspires me to do my best.
Cheers!
-
Originally Posted by Archie
-
Originally Posted by 26and385
-
Originally Posted by Rickco
Last edited by MCampellone; 12-05-2023 at 10:59 AM.
-
Archie, that bandsaw carriage is a piece of work. And your shop is clean as a whistle!
-
I will likely never see or play a Campellone, if theyre as high quality and classy as their maker then they must be among the very best!
Thankyou Mark
-
I got to hold a brand new Cameo model when I stopped by on Friday, I can confirm that the craftsmanship and the builder are both top notch. Thanks again, Mark!
-
Rick and Bill - thanks for the kind words - hope you have fun with the wood!
Barry Harris / Oliver Nelson - Dom7/Diminished,...
Today, 03:11 PM in Improvisation