So I'm the original owner of a strange Takamine bird from 1985 an EF-381 M.
It's an archtop per se, but equipped with a flat top glued bridge and round sound hole.
I have a historic attachment to it. However, acoustically it's nothing spectacular.
Originally the piezo system made it come alive when amplified.
In 2009 a reapir job ended up replacing the bridge and killed the piezo.
My main question is,
can I remove the glued bridge, fill the holes left by it,
add a trapeze tailpiece and a floating bridge + electric flatwound strings
and try to add a pickup to get as close to a floating humbucker pickup sound
as possible?
Are there laws of physics here I am unaware?
I know the floating neck pickup would be tough to pull off
I am including some pics including a bad photoshopped mockup of the end result that willupset the photoshop gods out there.
Any repair/luthier hands on ppl opinion would be welcomed.
MUCH more trouble and work and expense than it'll be worth ! This is actually a rare bird, the prototype of which was made for Ry Cooder back in the day....
- In order for a floating bridge to function properly the neck-angle has to be more steep than on a regular flattop.
- There won't be enough clearance for any floating pickup. Have you tried a soundhole pickup ? The old DeArmonds are quite cheap and sound absolutely cool !
- The bracing of an archtop guitar differs radically from that of other types.
- I've not handled this guitar personally but my guess is that the top is pressed, the arch quite shallow and it was never designed as an acoustic performer.
Let this one stay as it is and save up for a real archtop- plenty of affordable and good-sounding/playing models are available. The easiest and cheapest solution : get a soundhole
pickup designed for steelstrings (with adjustable poles) and plug in !
Probably there is not enough room vertically for a typical archtop type bridge. I would expect that the conversion, various customizations, and costs would be much more than the result would be worth. The OP also said, "acoustically it's nothing spectacular." If it's nothing spectacular now, then extensive modifications will just make it an expensive "nothing spectacular".
Additionally, the OP wrote "Originally the piezo system made it come alive when amplified." Why not have someone install a new, high-quality piezo system? That would be cheaper than the extensive modifications the OP described, and would be more likely to have an acceptable result. You could instead install a high-quality soundhole pickup like a Sunrise - relatively modest price, minimal modifications, likely acceptable result.
This Tak is not an L5 and will never approach the sound of an L5. If an archtop is what you want, buy an archtop.
Well, you've cleared the fog in my mind. Although there is a slight downward angle, it would not be sufficient to accommodate a floating bridge, you are right. And, yeah, a combo of flatwound strings and a sound hole mag pickup, may get it to sounding decent. Thank you for your advice.
Yeah, sure don't want a "an expensive "nothing spectacular" " ! Lol. I don't know where this category of guitar falls into.
Reminds me of an austrich. A bird with wings that cannot fly. That being said, a good mic would give it a boost. Thank you.
A soundhole pickup, as has been noted, will get you amplified in a economical fashion. Radically changing the basic geometry of an acoustic guitar is not advisable. Reversible mods are best mods, IMHO. Get the most from what you have, and save coin for something else - there are many, many good options these days. good luck in your quest!
I know the party line is that GBs are just JSs with blue silk wrap. But they definitely make my AF207 sound much better - the tone is richer top to bottom. I don’t think one or two thou of...
From your description, it could be an issue with the amp itself.
Does the amp buzz appreciably when no guitar cord is plugged in? If not, the problem could be the guitar cord itself. Try to...
I ordered a Superblock US and got it yesterday and while waiting for my Toob 6.5GP go come in I just went ahead and tried this thing via headphone out. This headphone out is definitely the best I've...
There is a product that was reviewed in GP. Company called Aero Instruments.
It looks like a penny at the end of a piece of wire. You attach the wire to ground and you put the penny against your...
Beyond words - stunning performance. 100% standing ovation from 500 strong audience in L'Astrada theatre/auditorium near the site of the annual festival in Marciac, Gers, France. Rythym Section of...
RJVB, this guitar was made by Herbert Todt, one of the great master makers of GDR. Todt made many fine carved archtops for other luthiers (or should I say resellers?), not only spectacular show...
We have been meeting regularly and have 3 gigs lined up, the first being at the end of May.
Plenty of time to practice or so we thought. I got a text this morning to see if I could fill for...
My amp did something similar and I sat for ages tapping different bits of pickup and string to make it stop. I even attached a wire from the bridge to the jack socket as an extra earth. I eventually...
Julian Lage Trio - Sat 27th April - Marciac,...
Today, 03:57 PM in The Players