So I'm the original owner of a strange Takamine bird from 1985 an EF-381 M.
It's an archtop per se, but equipped with a flat top glued bridge and round sound hole.
I have a historic attachment to it. However, acoustically it's nothing spectacular.
Originally the piezo system made it come alive when amplified.
In 2009 a reapir job ended up replacing the bridge and killed the piezo.
My main question is,
can I remove the glued bridge, fill the holes left by it,
add a trapeze tailpiece and a floating bridge + electric flatwound strings
and try to add a pickup to get as close to a floating humbucker pickup sound
as possible?
Are there laws of physics here I am unaware?
I know the floating neck pickup would be tough to pull off
I am including some pics including a bad photoshopped mockup of the end result that willupset the photoshop gods out there.
Any repair/luthier hands on ppl opinion would be welcomed.
MUCH more trouble and work and expense than it'll be worth ! This is actually a rare bird, the prototype of which was made for Ry Cooder back in the day....
- In order for a floating bridge to function properly the neck-angle has to be more steep than on a regular flattop.
- There won't be enough clearance for any floating pickup. Have you tried a soundhole pickup ? The old DeArmonds are quite cheap and sound absolutely cool !
- The bracing of an archtop guitar differs radically from that of other types.
- I've not handled this guitar personally but my guess is that the top is pressed, the arch quite shallow and it was never designed as an acoustic performer.
Let this one stay as it is and save up for a real archtop- plenty of affordable and good-sounding/playing models are available. The easiest and cheapest solution : get a soundhole
pickup designed for steelstrings (with adjustable poles) and plug in !
Probably there is not enough room vertically for a typical archtop type bridge. I would expect that the conversion, various customizations, and costs would be much more than the result would be worth. The OP also said, "acoustically it's nothing spectacular." If it's nothing spectacular now, then extensive modifications will just make it an expensive "nothing spectacular".
Additionally, the OP wrote "Originally the piezo system made it come alive when amplified." Why not have someone install a new, high-quality piezo system? That would be cheaper than the extensive modifications the OP described, and would be more likely to have an acceptable result. You could instead install a high-quality soundhole pickup like a Sunrise - relatively modest price, minimal modifications, likely acceptable result.
This Tak is not an L5 and will never approach the sound of an L5. If an archtop is what you want, buy an archtop.
Well, you've cleared the fog in my mind. Although there is a slight downward angle, it would not be sufficient to accommodate a floating bridge, you are right. And, yeah, a combo of flatwound strings and a sound hole mag pickup, may get it to sounding decent. Thank you for your advice.
Yeah, sure don't want a "an expensive "nothing spectacular" " ! Lol. I don't know where this category of guitar falls into.
Reminds me of an austrich. A bird with wings that cannot fly. That being said, a good mic would give it a boost. Thank you.
A soundhole pickup, as has been noted, will get you amplified in a economical fashion. Radically changing the basic geometry of an acoustic guitar is not advisable. Reversible mods are best mods, IMHO. Get the most from what you have, and save coin for something else - there are many, many good options these days. good luck in your quest!
I’ve played several plek’d guitars. Mileage may vary. There’s a steep learning curve for the machine’s operator. Fretwork and set-up done by a good tech who actually plays guitar him/herself feels...
Hi.
If I understand well you're asking for full hollowbody thinlines. ES330, and ES275 come to mind. While in the ES range. Apart from these I don't find others..
Guitarist I been working with for a while now has a semi hollow thinline L-5. It's definitely a custom made model. Has the master volume on the lower bout like an old Gretsch and one off side fret...
I would have counted everything up until 2:50 as 6/4, based on the phrasing of the melody. After that I get a bit confused as the melody is the same but the drums is playing a different feel which...
What thin line Gibsons were made over the years? I know I've seen pictures of a couple of L5 thin lines. They may have been custom made, I don't know. Also ES 125 and Byrdland. BTW, I didn't mean...
This looks to be super impressive to create great field recordings anywhere that automatically sync to the the 4K video on your iPhone—the world’s smallest condenser mic in a tiny block form that...
Probably not (unless he made one to fit the available space) but a Kent Armstrong single coil floater, floating CC from Pete or even a DeArmond 1100 would probably fit.
Yeah, I have never bought, nor refused to buy, any guitar just because of the headstock. I'm unable to see how the headstock shape affects tone or playability. If that were on the list, it would be...
Thank you for all the info Rickco!
I will give it some more thought and will let you know what i will go with. I have a Tele so I am looking for something different. The D'Angelico I'm looking at...
Gibson Thin line Guitar Models
Yesterday, 11:07 PM in Guitar, Amps & Gizmos