Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
Hi All,
I decided to do extensive nitro lacquer drop fill on the back of my 1981 ES-175. There were extensive buckle rash, gouges, etc., and the result came out looking great except for these...
https://youtu.be/_oAK42erZJk?si=KXeqnuYuRwIkQsRy
When I play freeform, and everything is in the moment, I strive for compositional logic and structure. When I play a tune like this one (“You...
Don't think the modern electric archtops would really do the sound you're looking for. Something with a bit more acoustic dry punch would be better? Too bad the price of a 50's Epiphone has gone up...
On the Benedetto style archtops (solid, carved) from Wu and Yunzhi, ports are huge. Very easy to test playing with them covered to see the difference so it's not just an impression. Port applies...
You might want to email Michael at DjangoBooks.com. He carries all sorts of rare and old pickups, including DeArmond. He also might be able to give you a lead on where to find a pickup or two. ...
I have two guitars with sound ports. The Beardsell short-scale high-A flattop is almost all soundport on the upper bout and delivers a lot more volume than you would hear from the top if there was...
I only had one that I forgot the name (some guy had gits made and imported them) of because I sent it back as it had many top cracks that the seller did not reveal.
That said, despite the cracks...
Since chords are derived from scales, the #11/b5 designation exists so that each letter of the musical alphabet is expressed only once in the chord scale.
so a chord with a b5 can theoretically...
As bad as that break looks, I bet a good luthier can repair that so you'd never know it broke, and it would never break there again. It's pretty clean.
Hello. Old thread I know, but the greatest blues music guitarist/singer/songwriter(imho) was never mentioned; the late Elmore James. All of his recordings are free on YouTube and he popularized many...
Yeah, it's not so much that I wouldn't want one, I just know if I were ever to buy a really nice hand built classical, it's probably not going to have a truss rod--traditional builders just don't use...
I have a Cordoba classical and I wish it had a truss rod. The new Cordoba Stage I bought DOES have a truss rod and I'm glad, I have already had to use it.
You Stepped Out of a Dream
Today, 11:34 AM in The Songs