Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
Actually, the entire 4 bars could be played in the first position if you use open strings but it may sound country especially if you're playing a Tele. :pig:
Unfortunately I can't notate open strings with the Chord Writer app I have, but the top strings are open, so all the chords I posted, except for two, contain the 5th of the chord: the open G string....
The OP's question is voicings of #11's with the 5th. I gave one example.
There are others but the chord charts you posted seem to omit the 5th. Also I don't see any open strings in the charts.
And there are many C Lydian voicings with open strings - more than any other chord if you count Am7 & Em7 voicings.
A couple of duplicates there but I can't edit the image....
Bluegrass players, almost without exception, will put the strap button at position 5 on their dreads.
My first archtop, an Eastman AR905CE, had the strap button at position 1. I really like it,...
I have a Ruck 2010 classical with a sound port. Ruck provided wooden plugs so you can plug the hole and tell the difference. There is a huge difference in the sound you're hearing as a player. ...
This isn’t what you asked, but I’ve had an AR810CE for 17 years and I never put a strap button on it. I thought about it many times but it’s never been a priority. Wes Montgomery, Grant Green, Barney...
On a daily basis I’m often switching from classical/flamenco necks with wide FB’s to my Tele, with a moderately full C, to the full D of my Martin, to my archtops which have a moderate D. Plus, the...
I always care about neck shape and size being somewhat ambidextrous,and writing with my left hand. Playing a right handed I’m sensitive to the feel, and having a large enough shape to feel...
Yeah! Apparently the Hammond, invented in 1935, was the very first synthesizer. It's just more dang skills to have to work up to work the switches throughout the tune. shreddin'
Autumn Leaves (Fingerstyle Chord Melody)
Yesterday, 11:56 PM in Improvisation