Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
I've had the LJ for several years now.
Early on, I was enamored of the sound. I still like it, but I only use it for very quiet situations now.
The sound for lead lines works fine for me,...
I just don't care, maybe because I used to own a music store and played, probably, hundreds of guitars in a month's time. Since I can rarely play instruments before I buy them, I'm, fortunately, able...
FYI the latest gen of the Blu no longer has a switchable send level in the loop. But I agree with you, most of the time I prefer my pedals in the loop rather than in front of the amp.
I sourced the woods for this one when John was going to build my guitar, after many calls all over the country I found 3 great sets of maple and 3 great sets of Adirondak spruce. I had a hard time...
You also need to take account for the nut width when looking at above specs. 1&11/16” vs 1& 5/8” nut width makes a huge difference on how much larger the same shape can feel.
Acoustic Image Clarus 2R Series III -- $700, plus shipping to continental US only.
I'm in the process of downsizing some gear, and I'm selling my beloved AI Clarus 2R Series III amp with the...
2
5
4
5
3
x
Is a common major7 voicing both with 5th and #4. In the example voicing it's Cmaj7. You bar the first finger slightly at an angle to get the 3rd and 2nd fret for the bottom and...
I got a new Eastman AR910ce (!) which has an endpin jack but not a strap button. I wish to have a new one installed and am wondering (1) where to place it and (2) which one I should purchase. So I am...
I got lucky, not only did I get to borrow the Starfire but a really good player came over last night so I got to compare listening from audience perspective. Unfortunately the pickups are different...
As I've said before, I think the LJ needs to be tilted to get the best sound, taming the bass and slight boxiness I hear when it's flat on the floor. I tilt mine using a wedge, and in that position...
Yes, if you play an acoustic archtop, the port is a very good thing. It fills in those lower midrange frequencies that you otherwise wouldn’t hear so well.
Acoustic Image Clarus 2R Series III
Today, 12:57 PM in For Sale