Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
It makes crossing strings extremely easy, as the pick has to hardly move. However you have less definition and a much rounder tone with less treble. Yet another thing to puzzle us when trying to...
You can sweep pick the last line at the 6th fret, it's a GbM7 arpeggio (preceded by the notes Eb & F on the 5th string). I played the entire four bars in the 4th to 6th fret positions, shifting as...
Hello again,
I finally completed my restoration work, not perfect, but much better than original condition!
I used a smooth brush to remove all the sticky dust on the pickups and polished...
Well, hey, surprise!
I just came here to read about something else, saw this and guess what - today I also fitted JS112s to my '66 ES125 and - exactly the same: new guitar!
I didn't move the...
I have a 1st generation Parker Fly, never tried, and never needed to turn the rod. More Non-defining info, I know, but a data point on stiff necks and boards.
2 new & excellent Jazz Comping Truefire...
Yesterday, 10:22 PM in Comping, Chords & Chord Progressions