Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
I know the party line is that GBs are just JSs with blue silk wrap. But they definitely make my AF207 sound much better - the tone is richer top to bottom. I don’t think one or two thou of...
From your description, it could be an issue with the amp itself.
Does the amp buzz appreciably when no guitar cord is plugged in? If not, the problem could be the guitar cord itself. Try to...
I ordered a Superblock US and got it yesterday and while waiting for my Toob 6.5GP go come in I just went ahead and tried this thing via headphone out. This headphone out is definitely the best I've...
There is a product that was reviewed in GP. Company called Aero Instruments.
It looks like a penny at the end of a piece of wire. You attach the wire to ground and you put the penny against your...
Beyond words - stunning performance. 100% standing ovation from 500 strong audience in L'Astrada theatre/auditorium near the site of the annual festival in Marciac, Gers, France. Rythym Section of...
RJVB, this guitar was made by Herbert Todt, one of the great master makers of GDR. Todt made many fine carved archtops for other luthiers (or should I say resellers?), not only spectacular show...
We have been meeting regularly and have 3 gigs lined up, the first being at the end of May.
Plenty of time to practice or so we thought. I got a text this morning to see if I could fill for...
My amp did something similar and I sat for ages tapping different bits of pickup and string to make it stop. I even attached a wire from the bridge to the jack socket as an extra earth. I eventually...
Julian Lage Trio - Sat 27th April - Marciac,...
Today, 03:57 PM in The Players