Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
This is my beloved ES-330L. The neck meets the body at the 19th fret instead of the 15th as with a traditional ES-330. Basically a fully hollow ES-335 with P90's.
Wow, that beauty goes way back - back to the days when quilted maple of that quality was much easier to get than it is now. At that time, the Special peghead inlay was not engraved - rather, the...
In this case the guitar is relatively subdued in the kitsch department shreddin'shreddin'shreddin'
(With this one we're getting close to what I call edel kitsch though - but not so much I...
Yes, but "that much" can be "only" 5 cents (and compensating that can be done by slipping the equivalent of a piece of toothpick under the string and against the nut).
The "nylon" strings I use...
No guitars here, but I find this awfully hard to beat. There are lots of great ones though.
https://youtu.be/9dDPVUNk1Mg?si=cEFWfQndag456aNE
Sent from my iPhone using Tapatalk
As SS pointed out, some 70 GJS had volutes. They actually did them both with and without. Most I’ve seen do not have them.
That said, that one doesn’t look like it has a volute to me. It looks...
I meant no harm or competition about "who invented" the solid body. Just pointing to the fact that Paul Bigsby led the way in America, not Fender or Gibson. I respect all the different luthiers from...
I was addressing the OP. I have no disagreement with what you posted. But if an individual string is so far out that it needs that much compensation, something is wrong. The easiest thing to try...
It'd be really interesting to see and hear a proper, in-depth comparison of a number of famous US-made archtops with their counterparts from the golden age of German archtop lutherie. IMHO that would...
I put it on when I went to bed last night, but I fell asleep. Have to try again. What I did hear of it, very interesting. I feel like people with either love to hate this one...
Yeah, it was decided that 13 and 14 were part of the line started prior.
I like it nice and slow too. Things get too fast and they sound spastic to me.
Benedetto 16-B Opulent Brown for sale
Today, 08:16 AM in For Sale