-
Might be fun!
-
09-13-2018 07:54 PM
-
Nice spalting! What’s your method of cutting the fret slots.
-
Yeah, it's a wild lookin' piece. My method is pretty low-tech... once the locations are carefully marked, it's just a straight edge and a fret-slotting backsaw.
-
What's the motivation? 7-8 strings?
-
Originally Posted by Jazzstdnt
- Exploring the tonal possibilities of combining the crisp, clear bass of the longer (25.5) scale with the sweet, warm trebles of the shorter (24.7) scale
- Exploring the ergonomic possibilities of a subtle multiscale design
- Expanding my skill set while having good, clean fun
6 strings... the fretboard hasn't been trimmed to width in that photo.
-
Cool.
Of course you're no doubt well aware that it won't catch on with 6 string players. I don't know much about them but was under the impression that fanned fret was necessary for addressing intonation and/or ergonomic issues associated with playing wide fretboard 8-string guitars.
EDIT: after further "research" it seems to be more about accommodating better tone quality for wider ranged tuning. i.e. very low bass and higher treble strings, benefitting from longer and shorter scale lengths, respectively. As you said.
For 6 strings it just doesn't seem necessary though.
Have you heard Charlie Hunter? He's an interesting player but I think his handling of bass chores constrains his melodic expression, and as a result I find that I ultimately check out, after listening for awhile.
-
Lots of fanned fret guitars in the flat top world. Not at all limited to 7-8 string guitars.
What kind of guitar is this for? A Tele?
Sent from my iPhone using Tapatalk Pro
-
Originally Posted by Jazzstdnt
Miss you on the Raney threads, Jehu! We're soldiering on with "Bout You and Me!"
-
Jehu, Go for it. You will enjoy it. Below is a picture of my Chris Forshage multiscale Orion. I really enjoy playing this guitar. My scale is 24.75 to 25.75. I'm glad that I didn't go beyond that on the low E side. I like the tight bass and the sweeter treble. While on archtops one won't find many multiscale guitars, one can find quite a number of acoustic and solid body 6 strings.
My next guitar from Chris will be a nylon Orion but a much thicker body. I haven't decided if I want to go multiscale on that guitar as the "ergo" shape places the guitar in an elevated position much like a classical guitar which negates some of the ergonomic positives about the multiscale neck i.e. if I play this guitar in a level position the slant of the frets conforms to your hand better than a conventional fretted neck but the higher it is raised the less so.
-
Originally Posted by lawson-stone
-
Originally Posted by rlrhett
"Lots of" is relative of course.
I'll take a rough guess that fewer than one tenth of one percent of flat top acoustic guitars on earth are fanned fret.
I have worked off and on in the business intelligence and analytics field for Fortune 100 companies. 0.1% is not typically characterized as "a lot" with regards to expensive/moderately expensive consumer products.
-
Originally Posted by Jazzstdnt
Of course, I don’t work for Fortune 100 companies, so I’m not sure how I could actually know anything. You must have hard numbers, though. Otherwise your experience in analytics is irrelevant and you are just another Joe making guesses based on your personal experiences outside of your work.
-
Bat-Man blows on this when he's kickin' back between calls. I think he's on Utube somewhere but I can't find the link just now.
-
Originally Posted by rlrhett
And my estimate was listed as just that, an estimate. I believe that less than .01% of flat top acoustic guitars on earth are fanned fret ones, and I'm further guessing that you agree. But if you have a different guess, by all means share. Peace out.
-
I love this Koll.
-
I'm enjoying the spirited discussion, folks! As Lawson noted, I do this mainly for my own interest and enjoyment, so I'm not terribly concerned about alienating my adoring customer base.
Originally Posted by rob taft
-
Originally Posted by ccroft
Interestingly the f hole shapes I am playing with would not be totally out of place in a batarang collection. It won't be quite as wild a body shape, though... 15" lower bout, 2.25" rims, florentine cutaway.
-
Originally Posted by lawson-stone
-
That bat-axe was made by Joe Egan, right here on Vancouver Island. Not had a chance to see his stuff in person yet. That pic was sent to me by a player friend.
Egan Guitars
-
I think it's a great idea!
Clay Conner:
German Guitars:
And Ralph Novak (Novax Guitars):
-
Originally Posted by ccroft
-
Originally Posted by BigDaddyLoveHandles
-
Look out Jehu. Judging by the pics, it seems once you fan the frets almost anything can happen!
-
Multi-scale guitars are actually quite easy to get use to. Only a few minutes into playing one most forget about the crooked frets. I have two; one with a 1/4” E to E disparity and the other with a 1/2” E to E disparity. You get a bit more solidity in the bass and sweetness in the trebles. Below is my oval holed OM built by luthier Howard Klepper. It has a 24.9” to 25.4” scale length.
-
While my wife and I are on Babywatch, I thought getting the neck roughed out would be a good way to pass the time!
This is a 3-piece neck made from a NZ native called Totara, which should finish up to a lovely deep golden colour. The front and back headplates are Walnut, as will be the binding when it arrives. The fretboard is another NZ native called Rewarewa (or sometimes New Zealand Honeysuckle). Aside from the wild spalting, you can see that it has a crazy, snakeskin-like grain.
I'm attempting a straight string pull on this one, which demands a rather acrobatic approach to headstock design in order to get the tuning machines to fit. The result certainly won't be for the aesthetic traditionalist, but I think it's kind of cool!
In case you're wondering where all of this is heading, this should give you an idea of my general plan...
KA PAF info please
Today, 11:52 AM in Guitar, Amps & Gizmos