-
I am considering another guitar purchase. The only solid body I have is a G&L Tribute Fallout. That guitar has not worked out for me as I find it too neck heavy.
Right now I am thinking a guitar with the strap peg located on a longer horn would work a little better. I am thinking perhaps a Stratocaster like guitar might work better. The simplicity of a Telecaster has appeal but I have seen comments indicating they tend to want to drift to the horizontal.
Anyone have any thoughts on Fender vs G&L Tribute?
After a quick comparison, I am thinking these two guitars are similar. Both have 12" radius.
Fender Classic Player '60s Stratocaster(R), Pau Ferro Fingerboard, 3-Color Sunburst
Legacy(R) | G&L Musical Instruments
I am a little reluctant to buy another Tribute. My luthier told me it has more relief on the treble side than the bass.
Weight of a Strat is a little bit of a concern.
Feeling a little bit scatter brained here. I don't have a semi hollow. Maybe I would be better off with an Eastman 25" scale, 16" semi hollow. Thinking it would more approximate the size and shape of the thinner 16" archtops that I am used to.
I have also become comfortable with my MK Rick Turner N6 semi hollow nylon guitar. Although there is a piezo steel string guitar with that shape they do not do a conventional electric guitar like that.
-
07-11-2018 09:50 AM
-
At first I thought you were looking for a guitar to play out in the very cold weather. Not uncommon where I live.
-
Originally Posted by Woody Sound
(That was my first thought...)
-
Originally Posted by DanielleOM
John
-
Aside for any qualitative differences between the G&L Tribute and the Fender:
-I suspect that the resale value of the Mexican-made Strats is better than that of Indonesian-made (formerly Korean-made) G&L Tribute strats.
-The Mexican Fender has an alder body and the G&L Tribute has a basswood body (except for the natural-finish ash version). I've always thought of basswood solidbodies as Chiclet guitars - hard outer coating, soft (and very dentable) on the inside.
-The Fender is extremely tweakable - almost every part can be changed with a wide range of drop-in aftermarket replacements, if you want to make changes to it. Less so for the G&L.
-
I moved the strap button on my Tele and Strat to one of the neck screws. The guitar sits much better that way for me and it stays at more of an angle. It could be mounted anywhere on the back.
-
Soloway guitars have a perfect balance. I have a Moniker Rival electric that is very comfortable. They can be found used very reasonably priced.
Moniker Rival Series Electric Guitar - Seafoam | Reverb
-
Originally Posted by Cunamara
-
Originally Posted by DanielleOM
JOhn
-
A strap with a rough surface or "nap" on the underside can work wonders for most so-called "neck dive" issues. Or you can play seated all the time. A Strat shape will stay in an angled position more readily than a Tele shape.
-
Originally Posted by Bflat
-
If you want a value for money strat and tele all-in-one then give a thought to the Ibanez Talman 303M... ?
Sweetwater is discounting from 550$ to 399$ at the moment.
-
Originally Posted by Ray175
-
I agree with the OP. The shorter body length of my Tele makes it hang horizontally especially if you, like me, like a higher playing position. I guess if you prowl around the stage with the guitar around your knees like Jimmy Page it's less of an issue.
-
Danielle,
Are you playing seated or standing? When seated, the Fender Jazzmaster and Jaguar (offset waist guitars) naturally tend to go to the 45-degree angle. See the picture of George Fullerton, co-developer of the Jazzmaster, below.
-
Originally Posted by Greentone
I usually play seated. I am right handed. When seated I usually play with the left leg crossed over the right leg, with the guitar sitting on the left leg. For me this tends to put the guitar in front of me with the horn mid chest. In that photo, I suspect George is using a foot stool.
That G&L Tribute Fallout has an offset shape but the body seems to be much smaller than jazzmaster. I tried to find one on line with a 12" fretboard radius. It's been years since I have played a guitar with a smaller radius and do not know if I could easily adjust to that.
-
A Strat with an alder body, you're not going to find a guitar much lighter than that unless it's made of balsa.
-
Originally Posted by D.G.
-
Originally Posted by lammie200
After seeing suede straps mentioned previously I did order one. However, the one I received was only suede on the outside. The finish on the inside was the same as my smooth finished leather straps.
-
I have an Italia leather strap that holds pretty well. The inside is unfinished, and holds neck-heavy guitars pretty well. They're pricey, but almost always on sale. I get offers all the time, and I can pass some on if anyone wants one. They're mostly BOGO or some half or or close. They're very well made.
-
Originally Posted by sgosnell
I took a look at the Italia strap page, and it does look like the texture on the back of their straps may have a little more grip than the straps I have been using. Meanwhile, I took a low cost adjustable web style strap and stuck some of that rubber kitchen drawer material on the back of the strap using double sided tape. That should provide plenty of grip.
A BOGO offer on those Italia straps would certainly make the price a little more palatable.
-
I have a couple of offers, for buy one get one free plus some more off, doesn't say exactly how much. I can forward it to you if you want, I have enough straps now.
-
Originally Posted by sgosnell
-
Would a carbon fiber electric work for you ?
Here is something from NAMM 2018, I think it might be pricey.
-
45 degrees, of what ? I still don't get the reference to 45 degrees
Enharmonics
Today, 09:59 AM in Theory