-
Hello all,
Greetings! I’m a long time lurker, but first time poster on this forum. Here’s my question for you all:
There is a very nice 1949 Gibson L-4C for sale at a decent-ish price (about $3,800), close to where I live. I’ve been seriously thinking of purchasing it and converting it into a L-4CES (I.e adding nice pickups and electronics).
Does anyone have experience with such a process? How did it turn out?
oh, and I plan on never letting go of it, and very much dislike floating pickups.
Thanks for your feedback!
-
02-18-2021 10:16 AM
-
Originally Posted by Goldtop69
-
Willie's in St. Paul Minnesota yesterday had a CES for sale. You should check that out. The acoustic version was never meant to be butchered and would likely not have a good result, so keeping it might end up being your only option, imho.
-
Thanks for your reply @deacon Mark.
I understand that you feel such a conversion would “ruin” the guitar. Could you elaborate on how that would be the case?
Wouldn’t a converted L-4 essentially be like a CES, i.e an ES-175 with solid instead of ply- wood, a configuration sought by many? Not to mention this is old wood and the back and sides are mahogany —my favorite. ?
If possible, I’m looking for a bit more than emotional responses here. Cheers!
cheers!
-
The carve of the plates and the bracing of an acoustic L4c are different than later made L4CES. Plenty of people have cut into these older guitars only to have the acoustic tone ruined, the top sink, and have feedback issues.
If you want a mountain bike you can’t get there by buying a delicate road bike and adding fat tires.
Sent from my iPhone using Tapatalk Pro
-
Originally Posted by Goldtop69
-
I'll preface this post by saying that I have added pickups to 2 vintage Gibson archtops. The first was an L-50 that was converted to an ES 150. The second was another L-50 that had a TK Smith Bigsby style-pickup. In both cases, I was very happy with the results. I ended up selling both, but the market value of these guitars was not negatively impacted. In fact, the TK Smith one sold so quickly and with so many inquiries, that I'm positive I priced it too low. TLDR is that (1) I am not a total purist and (2) I think I have a credible sense of what is a desirable mod for vintage archtops. Your L4C->CES conversion is not something I would do for the reasons below.
The spruce top on every L4 CES I've played is very thin. Much thinner than an any electric archtop I've played, even thinner than the early 175 Laminates. I would be concerned that this won't produce a nice electric tone, and will feed back too much. Also, I've only played one L4-C with a decent acoustic tone. I think there's a reason they didn't catch on. There are good ones out there, but only 1 out of the 5 I've played sounded any good (see video below). If it helps, my response is not because of because of any piety with regard to the L4C. I'm not saying "don't mod that precious instrument!" and I don't worry about the supposed sacrilege. I just don't think they're great guitars and I think you're taking a big expensive risk with this one.
The braces are not going to be spaced like a 175. If you cut the top, you'll be cutting the braces. If you're going to position the neck pickup where a CES neck pickup goes, that shouldn't be an issue because the braces are very thin and not adding much support there. If you're adding a bridge pickup, you'll be cutting right through the middle of the braces. Your best bet is to have a luthier remove the back and reposition the braces if you want a bridge pickup.
This is going to cost more than a CES and produce a guitar of significantly lower value. You think you'll never let it go, but this guitar could sound awful based on my first point above. If you decide you didn't like the result of the experiment, you're not going to get much of your money back on the used market.
The question you might want to ask yourself is, what are you trying to achieve? If you are after a more acoustic sounding version of the L4CES, then I would recommend the following two options:
(1) Get a 50's 175. The early single p90 versions are the most resonant and actually have a more pleasant acoustic tone than most L4Cs I've played. If you are set on a humbucker, look for a 1957-59 single pickup model. They're expensive but would cost about what your proposed project would cost. If you don't care about guitars that have been modified, then you can save money by getting a 175 where the PAF was replaced with a modern humbucker.
(2) Get an L4C and put a floating pickup on it. I know you said you don't like floating pickups, but you probably want to give them another shot. A local guitarist got one of these with a Johnny Smith pickup (I had almost bought the same guitar just weeks prior but the dealer gave off too much of a tweaker vibe to take him seriously). I've gotten to play it and it sounds amazing acoustically as well as plugged in. Every other L4C I've tried (including one that I owned for a few months) was a disappointment. This L4C with a Gibson Johnny Smith pickup sounds amazing:
Last edited by omphalopsychos; 02-18-2021 at 12:48 PM.
-
Here's a video I found of a 1950 L5CN CES... not sure if its original or modified to CES.
The sounds is still thin with very little bass fullness. Granted, I have no idea what amp is being used nor the settings, which would affect the tone as well.
I have mentally toyed with amplifying a 50s L4, but always come back to the sound being thin.
-
There was a single p-90 50s L4 for sale in the Denver area recently, but I can't find it now. There was a video of the guitar being gigged.
Here's a Craigslist ad selling a converted 1948 L4
Gibson L4-C 1948 - Amazing/Vintage! - musical instruments - by owner...
-
Here's a '56 L4C converted with a P90...
-
1948 L4C with a floating Benedetto pickup... sounds really good.
-
More Googling.... here's my favorite (looking) configuration so far... vintage L4C with a Charlie Christian. Sounds good... still on the thin side of tone.
-
It is not wise to harm a vintage guitar, all the while reducing it's value, in order to get something that is both readily available and not crazy expensive.
Buy a Gibson L-4CES if that is what you are after.
-
Originally Posted by Goldtop69
John
-
1951 L4C with DeArmond FHC pickup mounted to it, and it's plugged into a Fender Blackface Princeton Reverb amplifier.
This is sweet!
-
1958 Gibson L4-C, outfitted with a DeArmond FHC pickup, played into a Blackface Fender Princeton Reverb amplifier.
I'm getting sold on the DeArmond FHC pickup... sweet.
-
Originally Posted by John A.
-
I'll just add guitars are originally designed to preform optimally in their original state. Especially acoustic designed ones.
You will run into several issues such as top plate carve thinness as well as X bracing vs. Parallel bracing design.
Definitely avoid this process and trade or purchase the CES model equivalent. Or even have Stephan Holst, Mark Campellone, Franz Elferink make you one.
-
Originally Posted by John A.
From the a cost-resale angle it won't be worth the trouble. You can score an L-4CES for way lower than the money you put into this project. Even if you had inherited the L-4C and paid nothing for it I would still advise you to sell it, not modify it invasively and irreversibly, and use the proceeds to buy an L-4CES. Better preservation of value that way all round.
The L-4CES is out there...Keep looking.
-
2003 Gibson L-4CES | Willie's American Guitars | Reverb
Go to Willie's directly instead of through Reverb. You can probably get it for $4000 (or lower) and not get billed sales tax by Reverb if you are from out of state.
-
1989 Gibson L4 CES Sunburst - Thunder Road Guitars Seattle
^ you can probably score it for what that l4c is listed at.
-
Originally Posted by Goldtop69
-
See? Laminated maple 2003 vs. laminated mahogany 1989. Take your pick.
-
Originally Posted by Jabberwocky
-
I would vote for a floating pickup like one of the DA Rhythm Chief reissues. I have the 1000. The stick can be mounted with just 2 tiny screw holes on the neck, and run a 1/8" jack through the endpin for a minimalist installation.
You could mount a P90 on the surface of the top without changing the acoustic tone. Or get an archtop bridge pickup.
Originally Posted by Jabberwocky
Chief Xian aTunde Adjuah (Christian Scott)
Today, 12:32 AM in The Players