The Jazz Guitar Chord Dictionary
Reply to Thread Bookmark Thread
Page 17 of 18 FirstFirst ... 715161718 LastLast
Posts 401 to 425 of 436
  1. #401

    User Info Menu

    I added pix of the finished Cameo. It plays like a dream! Bob Wilcutt and his his sidekick Ben made a minor adjustment to lower the strings a TAD.

    The "Special" I have is being professionally photographed. It will come on the market soon. It is extra fine quality, has been lovingly played, and taken care of since 2007. I will talk with a few specialists to price it.

    I will post pictures of the blond "Special" S/N 3220607 soon. It is l antique blond, flame maple back/rims with a select spruce top. It has a floating gold pickup with a volume control. See the pix below. I will add the additional photographs when I get them within the week.

    By the way, Mark's backlog has exploded! I was introduced to him by a professional I met in Atlanta in 2002.
    Attached Images Attached Images The new CAMPELLONE V1K model begins-20200810-chestnut-jpg The new CAMPELLONE V1K model begins-20200717-cameo-rims-jig-jpg The new CAMPELLONE V1K model begins-sanded-back-jpg The new CAMPELLONE V1K model begins-20200810-f-holes-bound-img_0892_1-1-jpg The new CAMPELLONE V1K model begins-20200810-body-glue-up-img_0995_1-jpg The new CAMPELLONE V1K model begins-20200810-bound-top-img_1021_1-jpg The new CAMPELLONE V1K model begins-20200810-neck-glue-up-img_1045_1-jpg The new CAMPELLONE V1K model begins-20200810-peg-board-fingerboard-img_1036_1-jpg The new CAMPELLONE V1K model begins-20200810-fingerboard-pegboard-shaped-img_1087_1-jpg The new CAMPELLONE V1K model begins-20201104-cameo-front-jpg The new CAMPELLONE V1K model begins-20201104-cameo-back-jpg The new CAMPELLONE V1K model begins-20201104-cameo-headstock-jpg The new CAMPELLONE V1K model begins-20200326_105626-jpg The new CAMPELLONE V1K model begins-20200326_110112-jpg 
    Last edited by Don6200; 11-04-2020 at 11:04 AM. Reason: Add pictures

  2.  

    The Jazz Guitar Chord Dictionary
     
  3. #402
    Absolutely STUNNING ! That fingerboard is insanely beautiful.

  4. #403

    User Info Menu

    Thank you for your comment on the FINGERBOARD.

    I can't wait until the Cameo is ready! I will figure out how to drive to RI to pick it up just as I did for #322.

    Take care! ...Don6200

  5. #404

    User Info Menu

    Wow!
    I can’t even imagine the amount of work required to craft the fine scrollwork inlays. Someone must have nerves of steel to do that. Incredible.
    That is going to be a very fine guitar.
    Joe D

  6. #405

    User Info Menu

    i hope mr. campellone comments on that inlay work!

    cheers

  7. #406

    User Info Menu

    Quote Originally Posted by Max405
    Wow! I can’t even imagine the amount of work required to craft the fine scrollwork inlays. Someone must have nerves of steel to do that. Incredible. That is going to be a very fine guitar. Joe D
    Er, ah, times have changed in this regard. These days, almost all such inlays are designed by man and cut by machine, using CAD, CNC and similar technologies.
    Last edited by Hammertone; 02-23-2021 at 07:34 AM.

  8. #407

    User Info Menu

    Please give Mark a call as I did many years ago. ...Don Mills

  9. #408

    User Info Menu

    Quote Originally Posted by Hammertone
    Er, ah, times have changed in this regard. These days, almost all such inlays are designed by man and cut by machine, using CAD, CNC and similar technologies.
    It’s certainly possible, but I know from experience shell doesn’t cut well with a rotary tool or the kind of CNC machines a boutique builder might have access to. Work holding is an issue, and small bits need to spin at 5-10x the rpm of a typical woodworking spindle. Finally, attacking shell with a rotary cutting tool kicks up a lot of toxic dust. I’m not saying it is impossible, just that I suspect that this was cut by hand. Maybe not by Mark.

    Very intricate shell is being imported from mostly Vietnam where I am certain it is being cut by hand. I have seen similar sets available from sources like Duke of Pearl. Inlaying it into a fretboard is still up to the luthier, and far from trivial; but the truly stunning hand work is actually still being done the traditional way.


    Sent from my iPhone using Tapatalk Pro

  10. #409

    User Info Menu

    RLR, Great Post. Something so beautiful should not be just glossed over. The stunning inlays all look a little different from the next one. After the 3 years it would have taken me to finish up one, I would look at the next one and say, Nope, He's only getting one on this guitar!
    Thanks, JD

    Quote Originally Posted by rlrhett
    It’s certainly possible, but I know from experience shell doesn’t cut well with a rotary tool or the kind of CNC machines a boutique builder might have access to. Work holding is an issue, and small bits need to spin at 5-10x the rpm of a typical woodworking spindle. Finally, attacking shell with a rotary cutting tool kicks up a lot of toxic dust. I’m not saying it is impossible, just that I suspect that this was cut by hand. Maybe not by Mark.

    Very intricate shell is being imported from mostly Vietnam where I am certain it is being cut by hand. I have seen similar sets available from sources like Duke of Pearl. Inlaying it into a fretboard is still up to the luthier, and far from trivial; but the truly stunning hand work is actually still being done the traditional way.


    Sent from my iPhone using Tapatalk Pro

  11. #410

    User Info Menu

    Thank you all very much for your comments on the "Cameo's" fingerboard inlays. Mark Campellone told me he has a very special colleague who does them. I never considered the efforts required to do this work. Thank you for giving me another reason to admire Mark's artistry. ...Don6200

  12. #411

    User Info Menu

    Quote Originally Posted by neatomic
    i hope mr. campellone comments on that inlay work!

    cheers
    Some good questions and answers here on the subject of inlays. All the inlays for my regular production models are cut by Precision Pearl, Inc. (run by master mandolin builder Tom Ellis of Austin, TX) using CNC machines - CNC cutting works great for most stuff, but it can be problematic with extremely delicate pieces. For the first Cameo (prototype), I had a buddy cut the fingerboard inlays on his CNC machine - they came out OK, but there were some breakage issues. Following that, I contacted shell supplier Masecraft - like Duke of Pearl and DePaule Supply, Masecraft offers a wide variety of pre-cut inlays, all hand cut in Asia - they said there'd be no problem having my pattern cut. I was amazed at the quality and precision work done by these hand cutting wizards - then again, not all that surprising when you consider the very long tradition of expert shell work in Asian culture.

    As for setting the inlays into wood, I have all that work done by Bordeaux Inlay in upstate NY - Paul Bordeaux also uses a CNC machine in routing the pockets for my regular inlay jobs, but for the Cameo inlays, he routs the pockets by hand - and does a fine job!

  13. #412

    User Info Menu

    ^ thank you for your detailed response...appreciated

    am familiar with depaule..who have skilled inlay cutters in vietnam

    cheers

  14. #413

    User Info Menu

    FYI, as Mark explained, most luthiers outsource inlay work to specialists. Some still do there own inlay work by hand, but today’s market has little patience “for signs of the hand” in guitar details, so most outsource today. Aside from Tom Ellis who many use for more standard inlay work, there are a number of specialists who create beautiful custom inlays such as Craig Lavin, Harvey Leach, Larry Robinson and Jimmie Wingert.

  15. #414

    User Info Menu

    Quote Originally Posted by iim7V7IM7
    FYI, as Mark explained, most luthiers outsource inlay work to specialists. Some still do there own inlay work by hand, but today’s market has little patience “for signs of the hand” in guitar details, so most outsource today. Aside from Tom Ellis who many use for more standard inlay work, there are a number of specialists who create beautiful custom inlays such as Craig Lavin, Harvey Leach, Larry Robinson and Jimmie Wingert.
    In the "old days" when I started building, there was no internet providing easy access to good craftsmen in other parts of the country, and I hand-cut my own inlays - VERY time consuming and VERY tedious - here are pics of a couple of solid bodies I built back then with intricate inlays that I'd cut by hand - I doubt I'd have the patience for it nowadays : )

    The new CAMPELLONE V1K model begins-scan0005e-jpgThe new CAMPELLONE V1K model begins-vine-bass-2-jpg
    Last edited by MCampellone; 04-26-2021 at 11:17 PM.

  16. #415

    User Info Menu

    grate! rick turner/alembic/irwin era roots!

    cheers

  17. #416

    User Info Menu

    Quote Originally Posted by neatomic
    grate! rick turner/alembic/irwin era roots!

    cheers
    Ha - yes indeed! The guitar was built for a customer who wanted a copy of Gerry Garcia's guitar. And as you might know, I started out building electric bass guitars, and as you can see in these additional pics, Alembic was a huge influence for me -

    The new CAMPELLONE V1K model begins-scan0002-jpg

  18. #417

    User Info Menu

    Mark,

    Super. Do you still have one in inventory?

    Don6200

  19. #418

    User Info Menu

    nice! & a little carl thompson too!


    cheers

  20. #419

    User Info Menu

    I am very happy to be able to see the instrument come into being!

  21. #420

    User Info Menu

    I keep coming back to look at these.
    Does anyone know the width of these guitars? 16 inch or 17 inch across the lower bout?

    Quote Originally Posted by vinnyv1k
    Bonus build pics from this batch.

    Attachment 72072Attachment 72073

  22. #421

    User Info Menu

    Quote Originally Posted by Nick71
    I keep coming back to look at these.
    Does anyone know the width of these guitars? 16 inch or 17 inch across the lower bout?
    I think that the one with 2 x P-90s is 17" across the lower bout,
    and the one with 1 x P-90 is 16" across the lower bout.

  23. #422
    The V1K is 17x3 / 25 inch scale / 1-11/16 nut.

  24. #423

    User Info Menu

    Quote Originally Posted by Nick71
    I keep coming back to look at these.
    Does anyone know the width of these guitars? 16 inch or 17 inch across the lower bout?
    Hi Nick - Hammer is right - the two P90 guitar is 17" and the single P90 guitar is 16".

  25. #424

    User Info Menu

    Quote Originally Posted by Don6200
    Mark,

    Super. Do you still have one in inventory?

    Don6200
    Hi Don - sorry not to reply sooner - just noticed your post. Anyway, I only held on to one of my solid body instruments - a bass that I made for myself. I worked playing electric bass for many years, and after a while, I got tired of my shoulder aching from the strap - so I built this little bass that I jokingly refer to as the "orthopedic model" - It's neck-thru construction, with a Wenge neck and maple body wings - the body is 1&3/16" thick, about 9" wide @the lower bout and the bass weighs less than 5lbs : )

    The new CAMPELLONE V1K model begins-img_2316_1-jpgThe new CAMPELLONE V1K model begins-img_2307_1_1-jpgThe new CAMPELLONE V1K model begins-img_2313_1_1-jpgThe new CAMPELLONE V1K model begins-img_2314_1_1-jpgThe new CAMPELLONE V1K model begins-img_2315_1-jpg

  26. #425

    User Info Menu

    great fun to see the campellone basses...very much of the era...quite a contrast from the more traditional archtops he/you build today..bravo to both!

    can't help but think of carl t!

    just for info, what scale is the "orthopedic model"?...those tuners are wrapped! hah

    cheers