i recently bought a Guild X-175 Manhattan from the actual production series.
I love the neck and all the other specs, but i can't get along with P-90s. Thats the hard lesson that I learned with this baby.
Now I have the question should i sell it or switch the pickups to Humbuckers. I know there are only a view manufactures out there who have a exactly fitting pickup of the type P-90s with dog Ears but Humbucker inside.
One more thing that could be better is the feedback. But I think thats just with what you have to live if you love bigger jazz boxes.
What is it about the p-90 pickups that you don't like? Some day I would like to get a p-90 equipped archtop. Every one that I have tried I have liked - very cool sounds.
I always look at playability and the acoustic sound of a guitar first because if I like those the electronics can always be changed/upgraded. So if the guitar pleases you unplugged I'd keep it and explore the options for pups. I believe there's a company that makes a P90 cover to hold a humbucker but I'm not sure if it's just their humbucker or not.
Your guitar does not have P90s, but Guild's own version of them. Soundwise perhaps very close, but I think dimensions are different, so a humbucker-in-P90-cover might not fit without modification.
But the Creamery makes P90-sized humbuckers: The Creamery
Last edited by Little Jay; 04-15-2017 at 11:55 AM.
P-90 pickups are allright for me, but I wish the covers were black instead of cream white. They don't merge quite well with the guitar, they look like an afterthought...and still, humbuckers would be a better choice, IMHO.
Sell it and get the guitar that works for you. Better than guessing how the other solutions might sound and then spending the money to find out if you were right.
All these options, but you will probably need to modify something to get them to fit. If it's just drilling new screw holes, you'll be OK, but be careful and do it correctly. You may also have to enlarge the opening for different p/ups. Again, use care. Maybe a custom made unit? is what's needed, as the photo above shows, there are no "dog ears", tabs for mounting the P/up.
Last edited by Jimmy Mack; 06-18-2017 at 10:01 PM.
¿Maybe the same pickup in different configuration and mounting system?
Mounting ring screwed directly to the body and then the pickup screwed to the ring.
Just be sure and consider resale before you start modifying the top. A lot of "upgrades" on less expensive guitars will reduce resale value. I tend to agree with Jim Soloway. If you're not just completely enamored with everything else about the guitar, I'd consider cutting your losses and trying something else.
Another option might be to have someone install new insides to the pickups that are on the guitar now. When the Tone Spectrum pickup died on my 1951 Epiphone Zephyr Regent, Lindy Fralin installed a new pickup inside it.
i recently bought a Guild X-175 Manhattan from the actual production series.
I love the neck and all the other specs, but i can't get along with P-90s. Thats the hard lesson that I learned with this baby.
Now I have the question should i sell it or switch the pickups to Humbuckers. I know there are only a view manufactures out there who have a exactly fitting pickup of the type P-90s with dog Ears but Humbucker inside.
One more thing that could be better is the feedback. But I think thats just with what you have to live if you love bigger jazz boxes.
2 things: The pickups are not exactly shaped like p-90's so I don't think you can retrofit without some work. Also: I have the same guitar, and in the beginning I had some feedback problems. Here's how I fixed them: I took off the covers and unscrewed the 4 screws that mount the coil to the top. Then I added about 2mm of rubber hose (like the kind used for bike valves) to the screws so the pickup is now no longer mounted directly to the top. Put the covers back on - no more feedback!
The neck on the 59 reissue is pretty fat. That took me awhile to get used to. Some guys actually like that, I tolerate it. And with the skinny frets, unpotted pickups and light build, the 59 reissue...
I see a lot of "missing part X, which is like ten bucks..." nonsense. Just buy the damned part and install it yourself, and add the $10 to price already.
I know some forum members have stated this before but I never heard the difference people claim. I.e. input gain up doesn’t seem to make a difference in the level of compression or saturation. I was...
I have found that the tone is more balanced on the wedge and that I can hear it better. In fact, without the wedge, my Les Pauls sound downright muddy when played through the Bud.
Regarding solid...
Yours is also a great post with a lot of great info. I've also had a couple '70s 175s that were great but the most recent examples needed a ton of work. Maybe a '59 reissue would give me the vibe I'm...
This is a great post. The two 60's examples that I had may have been good guitars in the 60's, but they were not when they came to me. The two 70's examples that I had were great, but that was long...
Ive had mine for a month now so still trying different strings and action, that said heres what I know the body is mahogany which I believe is typical for Guilds as the starfire is also. The "MoP"...
I played the 2012 es-175 yesterday afternoon, made an offer, and it was quickly accepted. I think this was a guitar that was bought and cased for most of its life. The frets show almost zero marks;...
I bought a Bud a couple of years ago to replace an 80 watt Roland that was becoming too heavy for me to lug around. I tried it sight unseen, having been impressed with the reviews...and the return...
I wonder what the actual incidence/prevalence of these damages is. When it happens, we hear about it at length because people are rightfully upset; but that makes the problem seem potentially larger...
My Broadway Elitist had no solid top. It had an second thin wood layer on the inner side of the top. Maybe due to easier fabrication because they had pressed tops, not carved.
This topic was also...
McCoy Tyner style Pentatonic sequence with 5ths,...
Today, 09:35 AM in Improvisation