So I'm the original owner of a strange Takamine bird from 1985 an EF-381 M.
It's an archtop per se, but equipped with a flat top glued bridge and round sound hole.
I have a historic attachment to it. However, acoustically it's nothing spectacular.
Originally the piezo system made it come alive when amplified.
In 2009 a reapir job ended up replacing the bridge and killed the piezo.
My main question is,
can I remove the glued bridge, fill the holes left by it,
add a trapeze tailpiece and a floating bridge + electric flatwound strings
and try to add a pickup to get as close to a floating humbucker pickup sound
as possible?
Are there laws of physics here I am unaware?
I know the floating neck pickup would be tough to pull off
I am including some pics including a bad photoshopped mockup of the end result that willupset the photoshop gods out there.
Any repair/luthier hands on ppl opinion would be welcomed.
MUCH more trouble and work and expense than it'll be worth ! This is actually a rare bird, the prototype of which was made for Ry Cooder back in the day....
- In order for a floating bridge to function properly the neck-angle has to be more steep than on a regular flattop.
- There won't be enough clearance for any floating pickup. Have you tried a soundhole pickup ? The old DeArmonds are quite cheap and sound absolutely cool !
- The bracing of an archtop guitar differs radically from that of other types.
- I've not handled this guitar personally but my guess is that the top is pressed, the arch quite shallow and it was never designed as an acoustic performer.
Let this one stay as it is and save up for a real archtop- plenty of affordable and good-sounding/playing models are available. The easiest and cheapest solution : get a soundhole
pickup designed for steelstrings (with adjustable poles) and plug in !
Probably there is not enough room vertically for a typical archtop type bridge. I would expect that the conversion, various customizations, and costs would be much more than the result would be worth. The OP also said, "acoustically it's nothing spectacular." If it's nothing spectacular now, then extensive modifications will just make it an expensive "nothing spectacular".
Additionally, the OP wrote "Originally the piezo system made it come alive when amplified." Why not have someone install a new, high-quality piezo system? That would be cheaper than the extensive modifications the OP described, and would be more likely to have an acceptable result. You could instead install a high-quality soundhole pickup like a Sunrise - relatively modest price, minimal modifications, likely acceptable result.
This Tak is not an L5 and will never approach the sound of an L5. If an archtop is what you want, buy an archtop.
Well, you've cleared the fog in my mind. Although there is a slight downward angle, it would not be sufficient to accommodate a floating bridge, you are right. And, yeah, a combo of flatwound strings and a sound hole mag pickup, may get it to sounding decent. Thank you for your advice.
Yeah, sure don't want a "an expensive "nothing spectacular" " ! Lol. I don't know where this category of guitar falls into.
Reminds me of an austrich. A bird with wings that cannot fly. That being said, a good mic would give it a boost. Thank you.
A soundhole pickup, as has been noted, will get you amplified in a economical fashion. Radically changing the basic geometry of an acoustic guitar is not advisable. Reversible mods are best mods, IMHO. Get the most from what you have, and save coin for something else - there are many, many good options these days. good luck in your quest!
I wanted to point out that Monk's ballads are formidable af! Everyone knows Round Midnight, but he has a handful of others that are really good.
Crepuscule with Nellie
...
Reminds me of my beloved 66 Epi Howard Roberts Standard !
The neck was not a short scale, definitely longer that the one of the Byrdland I had at the same time, very similar to my teacher's ES175...
That's an interesting POV the OP has.
Personally, as still really a beginner at guitar, the *only* things I play when comping are inversions. Not as a rule, you know, but 90% of the time that's...
Excellent instruments can be had in that range, especially when buying used. Based on this price range I’ll echo the Eastman 580 CE once more.
https://m.youtube.com/watch?v=NBrWfUiUmW4
Many common power tubes use the same socket, except the EL84. I also asked Koch about tube swapping and the amp can handle it. I’ve already tried a 6V6 in mine but prefer the stock EL34. I did swap...
Thanks RLetson,
-But why do we think it's important that an artist performs his/her own material?
The recording industry is always looking for the next Taylor Swift, still some of her greatest hits...
Yeah, same here.
A set of feeler gauges is very inexpensive, and can be had at any auto parts store, or, I would think, most music shops....but, I haven't found much use for my set.
For...
Thanks for the reply.
What gets me a bit questionned is the tube socket ?
I'm not sure an EL34 socket is the same as the 6V6, and moreover the 6L6?
Maybe an adaptator is needed ?
Koch's answer...
Apparently so. The user manual lists a few possible substitutes for the EL34, including 6L6, 5881 and 6V6. Your concern about this swap is exactly the reason I'm not doing it yet. I've sent in a...
Playing live and getting the best sound from the...
Yesterday, 02:08 PM in Guitar, Amps & Gizmos