So I'm the original owner of a strange Takamine bird from 1985 an EF-381 M.
It's an archtop per se, but equipped with a flat top glued bridge and round sound hole.
I have a historic attachment to it. However, acoustically it's nothing spectacular.
Originally the piezo system made it come alive when amplified.
In 2009 a reapir job ended up replacing the bridge and killed the piezo.
My main question is,
can I remove the glued bridge, fill the holes left by it,
add a trapeze tailpiece and a floating bridge + electric flatwound strings
and try to add a pickup to get as close to a floating humbucker pickup sound
as possible?
Are there laws of physics here I am unaware?
I know the floating neck pickup would be tough to pull off
I am including some pics including a bad photoshopped mockup of the end result that willupset the photoshop gods out there.
Any repair/luthier hands on ppl opinion would be welcomed.
MUCH more trouble and work and expense than it'll be worth ! This is actually a rare bird, the prototype of which was made for Ry Cooder back in the day....
- In order for a floating bridge to function properly the neck-angle has to be more steep than on a regular flattop.
- There won't be enough clearance for any floating pickup. Have you tried a soundhole pickup ? The old DeArmonds are quite cheap and sound absolutely cool !
- The bracing of an archtop guitar differs radically from that of other types.
- I've not handled this guitar personally but my guess is that the top is pressed, the arch quite shallow and it was never designed as an acoustic performer.
Let this one stay as it is and save up for a real archtop- plenty of affordable and good-sounding/playing models are available. The easiest and cheapest solution : get a soundhole
pickup designed for steelstrings (with adjustable poles) and plug in !
Probably there is not enough room vertically for a typical archtop type bridge. I would expect that the conversion, various customizations, and costs would be much more than the result would be worth. The OP also said, "acoustically it's nothing spectacular." If it's nothing spectacular now, then extensive modifications will just make it an expensive "nothing spectacular".
Additionally, the OP wrote "Originally the piezo system made it come alive when amplified." Why not have someone install a new, high-quality piezo system? That would be cheaper than the extensive modifications the OP described, and would be more likely to have an acceptable result. You could instead install a high-quality soundhole pickup like a Sunrise - relatively modest price, minimal modifications, likely acceptable result.
This Tak is not an L5 and will never approach the sound of an L5. If an archtop is what you want, buy an archtop.
Well, you've cleared the fog in my mind. Although there is a slight downward angle, it would not be sufficient to accommodate a floating bridge, you are right. And, yeah, a combo of flatwound strings and a sound hole mag pickup, may get it to sounding decent. Thank you for your advice.
Yeah, sure don't want a "an expensive "nothing spectacular" " ! Lol. I don't know where this category of guitar falls into.
Reminds me of an austrich. A bird with wings that cannot fly. That being said, a good mic would give it a boost. Thank you.
A soundhole pickup, as has been noted, will get you amplified in a economical fashion. Radically changing the basic geometry of an acoustic guitar is not advisable. Reversible mods are best mods, IMHO. Get the most from what you have, and save coin for something else - there are many, many good options these days. good luck in your quest!
Posted By skrohn (0 replies)
Today, 01:22 PM in For Sale
New Forum Posts
The JS is not supposed to be an acoustic guitar. It is supposed to look like one but the bracing, body size, scale length, top thickness etc.. are designed to resist feedback.
That’s why people...
Yes, you hear something, you associate it with something you already know from somewhere else, you know how to play it.
A simple example, a I chord going to a I7 going to the IV. I don't need...
The original post... I think it's important that musicians sing, even if it's only in the practice room.
Classic rock bar band musicians usually have really good ears for what they do (and...
Jaz I think the Yammy sounds good. They are great guitars for the price and I enjoyed you channeling your inner Gabor.
The L4 has the more standard tone you would expect from an archtop; fatter...
There is another way that I use a bit. You sing the lyrics as you write the lyrics. So step 1 you simultaneously end up with lyrics and melody. Step 2 you put chords to the melody.
Bennedetto A6 is an excellent choice, that's what I would have used. I just saw Barry Greene playing with a trio here in Orlando, with a Benedetto Bravo that had an A6 pickup. The tone was "stellar"...
That's what I guessed (and I wasn't even thinking of analysing everything you play that way, all the time). Seems safe to say that you're matching intervals rather than hearing them.
A few years back I found a site that has movies, but it had commercials - the same ones over and over about every 10 minutes. One day I was so irritated I decided to go out and wash my car instead,...
Go to a jam session, they're falling off the trees there :cool:
Agree it's nice to have a good one if you can't have your regular. My longtime drummer who's pretty amazing recently missed a gig and...
Martin GPC-11E (CANADA ONLY!)
Today, 05:33 PM in For Sale