Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
Agree! Best iteration of Patricia Highsmith to date I've seen. Really feels like the book.
Certainly helps that they could take 8 hours to tell the story instead of the usual 1 or 2. I look...
A device for measuring the gap of spark plugs works pretty well as a way to measure action height. They have a number of wires of varying diameters, around a circle. Not so great for measuring the...
Having read a lot about neck angle issues on Loar guitars prior to my getting the 700 and the fact there is very little scope to lower the bridge (on mine), I've had it in my mind, for some reason,...
I play fingerstyle acoustic archtop guitar. My instrument is a 17” solid carved top 1959 Rodebald Hoyer “Samba”. I use Martin Monel .012, .025w, .054w // 1st, 3rd, and 6th string. I like a flat board...
Hard to say what's going on, but I'd offer this.
You mentioned tower speakers. Does this refer to a line array like the Bose L1?
It should be possible to make an L1 or similar line array...
Thanks much. After a very long time without success, I found a 2002 Heritage H-575 with a floating p/u at a reasonable price. Just need to lower the action a little but it will fill the bill for a...
I put JS112 strings on an Ibanez AS200 once. It sounded great for jazz but I think it took the instrument outside it's design parameters. One thing I like about roundwound .010s on the yamaha is that...
The Epiphone Howard Roberts archtop was specified with a carved spruce top, oval soundhole, and a 25 1/2" scale length. It's possible that some made it out with 24 3/4" scale boards, but I'm more...
Here are a couple of things I tried this afternoon.
1. I actually could not identify the 12AX7 that came with the amp, though it definitely sounded good. The EL34 is a TAD Redbase, and it seems...
Playing live and getting the best sound from the...
Today, 02:08 PM in Guitar, Amps & Gizmos