Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
Yeah, can you post a picture or two of the bridge/saddle so we know what we're talking about? If you mean that the saddle is *leaning* towards the nut that is not normal and can indeed cause...
Yes I've seen the 200 going for less than the 120s...the slimmer body and double cutaway is very interesting (though I would presumably still need a pickguard) and I'm not sure how much different...
If you have two sound sources and hypothesize that one is more compressed than the other (in this case, a guitar plugged into both channels of the bud with an ABY pedal; one channel with input gain...
Wine "Rustoleum" Red and Ebony are the cheap Gibson finishes. No impact on tone or playability. But they are the lowest cost finish and hence you should not pay too much for them. Natural costs the...
The open string and 12th fret harmonic will always be in tune with each other. The 12th fret harmonic should also be in tune with the same string fretted at 12th fret. Is that the case?
RP,
My guess is that it allows you to match the signal strength coming into the input while the output from the gain to the volume is fixed. My pickups are hot so I keep my input gain at around...
Grant Green, What is This Thing
Today, 01:59 PM in Ear Training, Transcribing & Reading