Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
So, a little update on this. I did find one that popped up on eBay overnight, shipped from Canada. This is the one in the configuration I wanted but interestingly there is no inlay that says "Pat...
D'Angelico electrics (the ones where John D'Angelico only made the necks) are NOT Excels. Those guitars were not even recorded in his ledger. The Style A, Style B, Excel and New Yorker models were...
Actually that's not true a lot except for The New Yorker was made by someone else out of plywood and he just put on the necks....A few months ago, I bought a vintage D'Angelico electric. I've tried...
Vince Magol, a lawyer, guitarist, and once-co-owner of Heritage talked about breakage. He said 2-3%. That includes all damage. Nothing will protect against an amuk forklift impaling a box.
Here...
The Korean made Excels are not identical to an original Excel at all.The originals were hand carved, solid wood archtops and the Korean made examples are pressed plywood guitars. I own an original...
The neck on the 59 reissue is pretty fat. That took me awhile to get used to. Some guys actually like that, I tolerate it. And with the skinny frets, unpotted pickups and light build, the 59 reissue...
I see a lot of "missing part X, which is like ten bucks..." nonsense. Just buy the damned part and install it yourself, and add the $10 to price already.
I know some forum members have stated this before but I never heard the difference people claim. I.e. input gain up doesn’t seem to make a difference in the level of compression or saturation. I was...
I have found that the tone is more balanced on the wedge and that I can hear it better. In fact, without the wedge, my Les Pauls sound downright muddy when played through the Bud.
Regarding solid...
McCoy Tyner style Pentatonic sequence with 5ths,...
Today, 09:35 AM in Improvisation