Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
I spent a little time today trying to get that first section up to speed, trying to see where basically I begin to lose control of it. In stepping up from 170, to 180, 200, and finally 210 I hit the...
I think there's that guy who did a video at Lincoln Center who demonstrated "chords" on the D string only. Didn't sound good to me, but people say that Freddie Green did it.
There's a Freddie...
I agree with the comfort and playability of the S15 - I was fortunate enough to buy the last S15 Jim made before retiring, and still have it today.
The S14 is even more comfortable and...
Older Heritage were the closest to Gibsons I've seen, great guitars.. I once missed buying a used lefty 575 for a great price .. :( But the Gibson guys are gone from Heritage now, and I haven't...
I like the sound of flatwounds but they're hard for me to play because I can't get any traction on them with the pick. Recently I put some blue painter's tape on the wound strings near the bridge....
Hi Greg. We plan to roll out the 27" Swan necks in the not-too-distant future. We feel like we need the larger body (15") for the 27" neck, so we are coordinating the production and rollout of those...
Thanks for all the thoughts. On the recording, I don’t think it sounded bad, just not what I was expecting, as PaulN pointed out.
What I gather from your comments and thinking about it some more...
How to make roundwound strings sound like...
Today, 05:05 PM in Everything Else