Is it possible to wire a Humbucker and a regular Tele Bridge pickup using a 4 way switch ? Im trying to get both series and parallel wiring on the neck pickup, both pickups together and lead single coil Tele.
Yep. I did that with Dimarzio Area Ts and with Wilde L280TN, both stacked humbuckers. No reason PAF style won't work. If there is a pick up cover it needs to be grounded separately. The diagrams ought to make things pretty clear.
although with a Dimarzio Area T (with cover) and then a Wilde L280TN (no cover). Haven't done it with a PAF style bucker, but I don't see why it wouldn't work with a 4 wire conductor. You might need to ground the cover.
One other ? Since I'm using both a Humbucker and a Single Coil what ohm pots should be used? I've seen diagrams with both 500k a d 250K as well as a mix.
Not sure which to go with?
Perhaps you could use 500k/250k dual ganged pots. I have a Strat with PAF buckers in the middle and bridge, SC in the neck and wired it so that there is a 250/500k volume pot, 250k tone pot for the neck and 500k tone for the buckers. I used one side of the switch as the 250k side and the other side for the 500k side- no jumper between the common terminals on the switch.
Funny you should mention Smith, I've been doing this thing every few months, I pick an artist and listen to 5 consecutive albums on 5 consecutive nights...tonight I'm going to finish off a run of...
They did. Consistent quality control. Gibsons are pretty hit-or-miss these days.
Anyways, the H-575 is sorta like an ES-175 and Gibson doesn't make that model any more.
Personally, I like what...
On their current website, Heritage does not describe the top or back plates of the H-575 as carved, or even solid wood. They do mention that the rims are solid wood.
Here is the relevant copy from...
I don't think good or poor conduction is the issue, but which will result in the tone desired. When I replaced the stock metal bridge of adjustable metal saddles on my arch top with a single piece...
They are all USA made. Price wise, it sounds like a lot and I don’t understand the solid rim either. On the other hand, try finding a decent, used, es-175 for under 4K. I’ll guess they saw that...
Good suggestion, but 2 different animals, both in tone, and feel. The PM200 has a much deeper body, and the single pickup gives it a different tone from the PM120 which is a two pickup guitar, so the...
I thought they were but haven't kept up. Was thinking $4.5K and $6K are a lot for a laminate and the price, in addition to the requisite marketing, is propelled by the cost of doing business in the...
My Sakura 175 copy has the post and no bracing. Actually it looks pretty shoddy and with the fake humbuckers! I don't believe the post is a repair for a sunken top, I think it's instead of bracing...
The arch top is stiffer than a flat top, and the f-holes allow it to move in a piston-like way. The bracing adds to this motion. This is nest for the mids. It affects violins and mandolins, as well....
Part 2 Secrets to McCoy Tyner using 4ths,...
Today, 07:31 PM in Improvisation