-
I've been curious about ergo for a while, with back/shoulder stuff anyway. It's a general class of instrument that is pricing me out, with current life priorities though. Anyway, I also have a son who has been kind of fixated on this notion of lutherie. I've groaned and hem-hawed every time he mentions it, but looking at this instructables project today got me thinking that I may have a synergy/convergence opportunity with my family and my GAS/back-ache needs.
Has anyone looked into this? I was thinking easy and not too expensive, like a used squire tele for parts etc. I love my squier tele and would like something similar for a starting base. I have zero bench experience. I've built a chicken coop, a loft bed and some other things over the years which didn't really have to be "pretty", but nothing serious.
What do you think about something like this for a beginner project? How doable is this?
$150 Custom Ergonomic Guitar
Says he didn't have any bench experience, but he was an engineering student. Anyway, he also linked this site as a resource: Building the Ergonomic Guitar: Guitar Designs. Ergonomics. Guitar Making.
Here's another one. Kind of the super nerd version of this type of project. Not even thinking about something that involved, but it looks cool:
Design and Build a Custom Electric Guitar - All
Lawson's kit project has gotten me thinking about entry-level solutions to my kid's lutherie-fever. Appreciate your thoughts.
-
01-14-2017 03:43 PM
-
The link below is from TGP where the individual used Warmoth parts and other available to make a headless. The Warmoth body blank is already routed to accept a typical strat neck so at that point you have a lot of neck options. You can buy the blank with just the neck pocket or get it routed to your pickup configuration. At this point it is doable to someone with hand tools and minimal power tools e.g. a jig saw or band saw
https://www.thegearpage.net/board/in...dless.1546382/
Warmoth Custom Guitar Parts - Guitar Body Blanks
-
The first link is priced right and could give the young man a baseline reference for his own design work. His engineering interest should be encouraged. Very few of the objects we create could not be improved, however marginally. And guitar designs that are safer, healthier, and greener are a good idea. If they are also cooler, that would be a bonus.
-
Originally Posted by rob taft
Looking at the first link I posted for the $150 job, it has that kind of funny looking tail on it. I'm assuming that's to accommodate actually leaving full headstock on, to keep it balanced? In terms of practical ergonomic considerations, how much of a difference does the headstock actually make?
-
You can buy a strat kit for under $75. I saw one for 58.00 on E bay. I think you can learn about how guitars work from building one or modifying one. A few good books on guitar construction are also a good starting point. Tools are often a limiting factor when starting out with building.
-
"Ergonomic" is usually some klein electric style model (i.e., Forshage, Canton, Victor Baker, etc.), and yes, they're between $2-4K [actual Klein's are $5K]. [NOTE: "ergo" and "headless" are not the same thing!] You can buy plans for a "harp" klein here: Instrument Plans | Guild of American Luthiers [Plan #34, about a third down the page] -- just use the body and neck design, and leave off the harp! With "zero" bench experience, though … it's up to you.
There's a guy in Las Vegas who sells klein-style for about $300; you can get one and tweak it to your likes.
I've had a Klein and a Forshage; the Forshage was the superior instrument, and far more reasonably priced.
For back/shoulder issues, you can't beat these ergo guitars.
-
Originally Posted by marcwhy
Who's the guy in LV, BTW?
-
Originally Posted by matt.guitarteacher
I couldn't find the Vegas guy's web site, but this is him: https://www.thegearpage.net/board/in...guitar.686151/ Try emailing; I have one for practicing in my office at lunch, but I've never played it at a gig.
Marc
-
Your only limited by your imagination if you can find a way to cut and shape wood with accuracy. When I wanted a more comfortable elec. bass to play I used a free plan from R.M. Mottola's website. I changed the shape of the body a little. I also made the body fully hollow with a center beam, bent ribs and top and back plate construction, to make the body lighter. He calls this a mezzaluna (half moon) electric bass. This is by far my favorite bass to play. She weighs in at 5.4 lbs. I am planning on a guitar version. The guitar version should be even lighter!
-
Cool. My main concerns, to start, would be about sitting posture ergonomics, and esse of build cost.
I guess, to accommodate standing, most ergo instruments are probably going to be some type of hollow body or semi, to keep eight down?Last edited by matt.guitarteacher; 01-15-2017 at 10:37 AM.
-
For playing guitar while seated, it helps if the guitar is evenly balanced while resting on the leg. Lightweight is also a big plus. Oddly enough the mezzaluna shape rests comfortably on your leg with neck held high or low. A guitar version would probably need to have the area that rests on your leg extended slightly. My problem with the $150.00 ergo guitar is that you are forced to hold the neck at an elevated angle while seated. I guess that is the point. However, in my case this would be uncomfortable, I have limited mobility in my right wrist. This is probably not an issue for most players. Sometimes only a custom build can get you everything you want in a guitar.
-
Originally Posted by matt.guitarteacher
The kleins, Forshages, Cantons, etc. are both solid and hollow/semi-hollow. Balance is the thing, though.
-
https://www.facebook.com/H%C3%B8ybr%...4059405779214/
There's some pics and videos of an ergo partscaster that I built on my facebook page. I designed it to rest over both legs so that it would balance on its own. My main reason for building was right shoulder pain. This design helps with that a lot. If I were to build another I would build on a Strandberg body shape. You can download the plans for free on his website.
-
I'm in a related position where I'd love to have some ergonomic-shaped guitars (like Tim Miller's Klein) but sound quality actually is not a priority, long story short. I would be very happy with a mid grade acoustic in an ergo shape and even lower quality for the electric. I'm thinking guitars that might cost $400-$700 otherwise, simply with a different body shape. I don't know if the steep prices for most ergos is because of the shape alone, or if it's because anybody who wants to get a custom-shaped guitar is probably also particular about, well, it sounding good, being able to performa and record with it, etc.
Jake
-
Originally Posted by JakeAcci
Last edited by Matt Cushman; 02-05-2017 at 12:55 PM.
-
You might want to consider something leaning a little more conventional like starting with a lightweight contoured Tele platform. That way you wouldn't have such a strange animal that will be difficult to sell if you need/want to. USACG just lowered their prices on necks and bodies.
-
Originally Posted by Matt Cushman
Last edited by JakeAcci; 02-05-2017 at 03:41 PM.
-
Originally Posted by JakeAcci
But I'm firmly in the "don't know anything" category here.
-
Originally Posted by matt.guitarteacher
-
Originally Posted by JakeAcci
-
these dang things should just be mass produced already.
-
For a solid body guitar you can find explorer style and jaguar style and other various kits that have larger sized bodies that could be cut down to your desired shape. There are also headless kits that could be used in an ergonomic design. I am tempted to order a headless model just to get all the hardware at a good price.
-
Originally Posted by matt.guitarteacher
I took a cheap garage sale acoustic guitar and cut a wedge off the upper shoulder for an arm rest, and a cutout for the right leg in the lower shoulder. Still a bad guitar, but sits nice in the lap with the neck up design. Over all a nice way to spend a sunday.
-
This thread sparked my interest in an ergo electric guitar build. I ordered a headless bridge and nut plate from a E bay seller in Hong Kong for $ 37.00 with free shipping. That is a low cost setup considering it serves as the nut, tuners, tailpiece and bridge. I have lots of soft maple and a ebony fingerboard for the rest of the build. I may be able to set my own low cost record with this build. This should be fun! I plan on starting a thread after I get the parts.
-
I was interested in the headless guitar kits so I ordered one from an E-bay seller. This model has the same type of bridge that I purchased earlier. I received the guitar kit before the bridge even though I ordered the bridge days earlier. The whole guitar weighs only 5.3 lbs. There is little to assembling the guitar. Just add glue to the neck joint. Drill a few holes and add finish, then mount the hardware. The frets do seem to need some leveling but overall not too bad. I may dye the fingerboard as well.
Part 2 Secrets to McCoy Tyner using 4ths,...
Today, 07:31 PM in Improvisation