Your favorite 335 copy

bfloyd6969 · #1 11-22-2011, 01:28 AM

I'm interested in hearing what your all 335 copy favorties are. I've only experienced the Ibanez AS series and the Epiphone Dot (which I currently have), but would like to find a beefier neck profile. I think the Ibanez' are well built guitars for the monies asked of them, but of course the necks on these are on the thinner side for my liking. The Epi Dot has a thicker neck profile, but I would still try to find something a bit more thicker. I've never had my hands on the real deal, Gibson 335 but I've read that some of them have the Gibson 50's rounded profile. I am assuming that these are chunkier necks? Sadly, they are out of my budget which sparked the reason of this thread. Please tell me your favorite 335 copies and why you like them. Thanks.

Flat · #2 11-22-2011, 02:01 AM

Heritage 535.

A great Gibson 335 in virtually every way. The neck is a nice balance of fast and chunky, imho. I'd take my 535 over most recent-decade Gibson 335s. Not everyone would, I suppose, but I would.

gratuitous guitporn added later:

RCGuitarStudio · #3 11-22-2011, 02:47 AM

I hear Edwards to a 335 copy that is supposedly very good. They retail around the $1k figure.

IbanezAS100 · #4 11-22-2011, 03:22 AM

Since you're not keen on Ibanez necks, I would recommend a used Japanese Tokai (ES or UES series, very close to 58 Gibson specs) or Yamaha SA series. For something a little different, a German Hofner Verythin (Classic or Standard) might be worth trying as well.

Franz 1997 · #5 11-22-2011, 03:47 AM

Used Greco 335 copies from the 80s, specially the 'super real' series, and 90s tokai japanese-made 335s - some have fat necks. These guitars are structurally and tonally on a par with gibsons - the greco super 58 pickups are quite sought after- although the grecos have poly finishes in most cases. In the case of both brands, the wiring is inferior, often breaks or shorts out, and needs to be replaced with switchcraft components and proper wire. But otherwise, they are accurate replicas of 60s 335s, apart from the name on the head, and made with the same woods - which many modern clones may not be, because of cost considerations.

They are around on ebay for about £600+/ $900+, although you'd have to upgrade the wiring.

jorgemg1984 · #6 11-22-2011, 04:15 AM

I have a Cort Source that costed me 330€ and I really really like it.

vinlander · #7 11-22-2011, 05:30 AM

Can't complain against my korean Epi Sheraton II.
The neck on it is perfect

Steve Z · #8 11-22-2011, 06:36 AM

Hohner sh35 ... a fantastic mid-'90s 335 clone. Well made, play great with a chunky neck. Used prices range from $300-450 if you can find one. I used to own one and wish I still had it.

Jabberwocky · #9 11-22-2011, 08:18 AM

The Edwards E-SA-138LTS has a thin profile "60s" neck.

I would also recommend the Seventy-seven Guitars Exrubato or the Tokai copies.

Tom Karol · #10 11-22-2011, 08:55 AM

I have this one: http://www.jazzguitar.be/forum/guita...335-clone.html. But there are so many 335-style guitars available both new and used for under $1k, that my recommendation would be make it your mission to try as many as possible without, if possible, preconceived notions about what will be good. At that price level, there will be some gems and some dogs even with the same manufacturer and model.

helios · #11 11-22-2011, 09:35 AM

The Yamaha SA-2200/2100 is worthy of consideration. The stock pickups were a little bright for me, so I replaced them.
Tommy Tedesco used to play the SA-2100 in the studio, and here's a clip of Frank Gamblae playing one (you'll see it after about 2:30 into the video:

YouTube Video

Greco · #12 11-22-2011, 09:42 AM

Quote:

Originally Posted by Franz 1997

Used Greco 335 copies from the 80s

This is what I have (hence, my forum name) and I have always enjoyed this guitar.

I replaced all of the electronics.

Cheers

Dave

Bobsynth · #13 11-22-2011, 01:34 PM

I just went through what you are going through . I ended up buying an Eastman T185MX. After playing the Gibson and the Epiphone Sheraton 2, they can't compare with the Eastman. Handmade and no laminates. 1 3/4 in neck, which is wider than most and really makes it easier to play. I've owned it for 2 months and gig with it 4 times a week. I'm so impressed that I ordered another but an ElRey E3. Try it and you'll be hooked.

Quote:

Originally Posted by bfloyd6969

I'm interested in hearing what your all 335 copy favorties are. I've only experienced the Ibanez AS series and the Epiphone Dot (which I currently have), but would like to find a beefier neck profile. I think the Ibanez' are well built guitars for the monies asked of them, but of course the necks on these are on the thinner side for my liking. The Epi Dot has a thicker neck profile, but I would still try to find something a bit more thicker. I've never had my hands on the real deal, Gibson 335 but I've read that some of them have the Gibson 50's rounded profile. I am assuming that these are chunkier necks? Sadly, they are out of my budget which sparked the reason of this thread. Please tell me your favorite 335 copies and why you like them. Thanks.

ESCC · #14 11-22-2011, 01:37 PM

Quote:

Originally Posted by Flat

Heritage 535.

A great Gibson 335 in virtually every way. The neck is a nice balance of fast and chunky, imho. I'd take my 535 over most recent-decade Gibson 335s. Not everyone would, I suppose, but I would.

+1 on the Heritage 535 . . . I no longer think of it as a copy.

Franz 1997 · #15 11-22-2011, 03:02 PM

Maybe this is a bit pedantic, but there are 335 copies, and then there are 335-style guitars. I'd think of the Heritage as a special case, because of its, er, heritage!
I use an 80s greco copy ( like Greco, above) because it's a dead accurate copy of a 62 block 335, sounds the same, I can put bigger frets in without ruining the resale value, and it's not worth so much that I daren't take it out of the house.

bfloyd6969 · #16 11-22-2011, 03:57 PM

Wow!! Lot's of great replies - thanks, everyone! I will get busy looking up all the names mentioned here. Unfortunately I live in a country-fied area and don't have much access to big city life, so getting out and trying many is not an option uless I drive an hour and a half. Still, I will do as much research as I can before making epic trips

Thanks again to all.

cosmic gumbo · #17 11-22-2011, 05:17 PM

A Guild Starfire is a nice copy, if one can be found. Washburn made a nice one too. I think finding a clone with a chunkier neck could be tough.

Little Jay · #18 11-23-2011, 01:21 AM

My favorite ES-335 copy is my ES-333.... still has the Gibson-name on the headstock and can be found for some 800 - 1100 bucks, which is about a 3rd of an Es-335. I simply looooove the neck-profile: 60ies slim taper, but it's not that slim at all. It just has less fancy decorations than the ES335 and access to the electronics on the back (à la the BB-King model).

bfloyd6969 · #19 11-23-2011, 01:27 AM

Quote:

Originally Posted by Little Jay

My favorite ES-335 copy is my ES-333.... still has the Gibson-name on the headstock and can be found for some 800 - 1100 bucks, which is about a 3rd of an Es-335. I simply looooove the neck-profile: 60ies slim taper, but it's not that slim at all. It just has less fancy decorations than the ES335 and access to the electronics on the back (à la the BB-King model).

Isn't the ES-333 the same or similar as the Tom Delonge model?

marcwhy · #20 11-23-2011, 06:57 AM

To Bfloyd: please be more specific with your title -- "Favorite 335" conjures up many great examples, but your actual post is looking for an "inexpensive 335 copy." Not everyone thoroughly reads the posts, and some only respond to the title, so you're getting a mix of responses.

FWIW, I had a great Washburn (HB-35, I believe was the model) -- a few hundred bucks; I upgraded the pickups and it was an excellent guitar.

whosgarethparry · #21 11-23-2011, 08:16 PM

here's mine,

http://www.jazzguitar.be/forum/guita...cci-335-a.html

all mahogony, beefy neck, a zero fret, with a slightly shallower headstock angle......

Pierrot · #22 11-24-2011, 02:04 AM

Not really a 335 copy, more of a 339: the Eastman T184MX

Little Jay · #23 11-24-2011, 03:59 AM

Quote:

Originally Posted by bfloyd6969

Isn't the ES-333 the same or similar as the Tom Delonge model?

Not quite, the TD-model has completely different electronics with only one bridgehumbucker. And it has a (to me) very ugly finish with stripings.

ES333 (mine, updated with classic 57s and a scratchplate)

Tom Delonge-model:

bigdaddyguitar · #24 11-24-2011, 10:22 AM

Have a late ' 90s Sheraton that I used to gig with . Really nice guitar .

FrankLearns · #25 11-24-2011, 03:10 PM

I recently tried a Duesenberg Fullerton and it is a killer guitar with a very beefey neck. Just can't deal with the white color ....

Kuz · #26 11-25-2011, 12:39 PM

Another vote for Heritage 535. They stand up to or exceed Cust Shop Gibson 335s!!!

the*doctor · #27 11-25-2011, 03:36 PM

I've got an 'Orville by Gibson' ES 335. Basically Gibson's Japanese market, so it's not sub par quality like epiphones.

They're actually made much better than Gibsons made today, I tried a couple of gibsons at the music store and they felt kinda plastic and cheap to me, with not as nice a sound.

My teacher has an older gibson es335 and they sound exactly the same. They're not made anymore, but show up on ebay from time to time.

Here's a pic of mine, on the right:

Uploaded with ImageShack.us

I bought it for about $1300 AUD, it was made in 1997.